Menu
Industrial Automation
E2E NEXT
Proximity Sensor
Enables easier and standardized designs previously not possible. IO-Link as a standard feature
Related Contents
Application Solutions
- Features
- Lineup
- Specifications
- Dimensions
- Catalog / Manual / CAD / Software
DC 3-Wirelast update: October 2, 2023
DC 3-Wire
PREMIUM Model
DC 3-wire (Quadruple/Triple distance model)
Shielded
| Types | Quadruple distance model | ||||
|---|---|---|---|---|---|
| Size | M8 | M12 | M18 | M30 | |
| Model | E2E-X4[]8 | E2E-X9[]12 | E2E-X14[]18 | E2E-X23[]30 | |
| Sensing distance | 4 mm±10% | 9 mm±10% | 14 mm±10% | 23 mm±10% | |
| Setting distance | 0 to 3 mm | 0 to 6.8 mm | 0 to 10.6 mm | 0 to 17.6 mm | |
| Differential travel | 15% max. of sensing distance | ||||
| Detectable object | Ferrous metals (For non-ferrous metals, refer to the Engineering Data on Catalog.) | ||||
| Standard sensing object | Iron,
12 × 12 × 1 mm |
Iron,
27 × 27 × 1 mm |
Iron,
42 × 42 × 1 mm |
Iron,
69 × 69 × 1 mm |
|
| Response frequency *1 | 700 Hz | 700 Hz | 350 Hz | 200 Hz | |
| Power supply voltage | 10 to 30 VDC (including 10% ripple (p-p)), Class 2 | ||||
| Current consumption | 1-output models: 16 mA max. | ||||
| Output configuration | B[] Models: PNP open collector, C[] Models: NPN open collector | ||||
| Operation mode
(with sensing object approaching) |
1-output models (B1, C1): NO (Normally open),
1-output models (B2, C2): NC (Normally closed) |
||||
| Control
output |
Load current | 1-output models:
10 to 30 VDC, Class 2, 50 mA max. |
|||
| Residual voltage | 1-output models:
2 V max. (Load current: 50 mA, Cable length: 2 m) |
||||
| Indicator *2 | In the Standard I/O mode (SIO mode): Operation indicator (orange, lit) and
communication indicator (green, not lit) In the IO-Link communication mode (COM mode): Operation indicator (orange, lit) and communication indicator (green, blinking at 1 s intervals) |
||||
| Protection circuits | Power supply reverse polarity protection, Surge suppressor, Output short-circuit
protection, Output reverse polarity protection |
||||
| Ambient temperature range | Operating: -25 to 60°C
Storage: -25 to 70°C (with no icing or condensation) |
Operating/Storage: -25 to 70°C (with no icing or
condensation) |
|||
| Ambient humidity range | Operating/Storage: 35% to 95% (with no condensation) | ||||
| Temperature influence | -15% to 25% max. of
sensing distance at 23°C in the temperature range of -25 to 60°C |
±15% max. of sensing distance at 23°C in the temperature
range of -25 to 70°C |
|||
| Voltage influence | ±1% max. of sensing distance at rated voltage in the rated voltage ±15% range | ||||
| Insulation resistance | 50 MΩ min. (at 500 VDC) between current-carrying parts and case | ||||
| Dielectric strength | 1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case | ||||
| Vibration resistance
(destruction) |
10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions | ||||
| Shock resistance
(destruction) |
500 m/s2 10 times
each in X, Y, and Z directions |
1,000 m/s2 10 times each in X, Y, and Z directions | |||
| Degree of protection | Pre-wired Models, Pre-wired Connector Models: IEC 60529: IP67, ISO 20653 (old
standard: DIN 40050 PART9): IP69K, JIS C 0920 Annex 1: IP67G, Passed OMRON's Oil-resistant Component Evaluation Standards *3 (Cutting oil type: specified in JIS K 2241: 2000; Temperature: 35°C max.) Connector Models: IEC 60529: IP67, ISO 20653 (old standard: DIN 40050 PART9): IP69K |
||||
| Connection method | Pre-wired Models (Standard cable length: 2 m), Pre-wired Connector Models (Standard
cable length: 0.3 m) and Connector Models (M12 Connector, M8 (4-pin) Connector and M8 (3-pin) Connector) |
||||
| Weight*4
(packed state) |
Pre-wired | Approx. 85 g | Approx. 95 g | Approx. 180 g | Approx. 260 g |
| M12 Pre-wired
Smartclick Connector |
Approx. 55 g | Approx. 70 g | Approx. 115 g | Approx. 200 g | |
| Connector | Approx. 40 g
(M8/M12 Connector) |
Approx. 55 g | Approx. 95 g | Approx. 180 g | |
| Materials | Case | Nickel-plated brass | |||
| Sensing surface | Polybutylene terephthalat (PBT) | ||||
| Clamping nuts | Nickel-plated brass | ||||
| Toothed washers | Zinc-plated iron | ||||
| Cable | Vinyl chloride (PVC)
Note: Material of Pre-wired Models and Pre-wired Connector Models. |
||||
| Main IO-Link functions*2 | Operation mode switching between NO and NC, self diagnosis enabling, excessive
proximity judgment distance selecting, timer function of the control output and timer time selecting, instability output (IO-Link mode) ON delay timer time selecting function, monitor output, operating hours read-out, readout of the sensor internal temperature, and initial reset |
||||
| IO-Link
Commun- ication specifica- tions *2 |
IO-Link
specification |
Ver 1.1 | |||
| Baud rate | COM2 (38.4 kbps), COM3 (230.4 kbps) | ||||
| Data length | PD size: 2 bytes, OD size: 1 byte (M-sequence type: TYPE_2_2) | ||||
| Minimum cycle
time |
COM2: 2.3 ms, COM3: 0.4 ms | ||||
| Accessories | Instruction manual, Clamping nuts, Toothed washer | ||||
| Types | Triple distance model | ||||
|---|---|---|---|---|---|
| Size | M8 | M12 | M18 | M30 | |
| Model | E2E-X3[]8 | E2E-X6[]12 | E2E-X12[]18 | E2E-X22[]30 | |
| Sensing distance | 3 mm±10% | 6 mm±10% | 12 mm±10% | 22 mm±10% | |
| Setting distance | 0 to 2.4 mm | 0 to 4.8 mm | 0 to 9.6 mm | 0 to 16.8 mm | |
| Differential travel | 15% max. of sensing distance | ||||
| Detectable object | Ferrous metals (For non-ferrous metals, refer to the Engineering Data on Catalog.) | ||||
| Standard sensing object | Iron,
9 × 9 × 1 mm |
Iron,
18 × 18 × 1 mm |
Iron,
36 × 36 × 1 mm |
Iron,
66 × 66 × 1 mm |
|
| Response frequency *1 | 1,000 Hz | 800 Hz | 500 Hz | 200 Hz | |
| Power supply voltage | 10 to 30 VDC (including 10% ripple (p-p)), Class 2 | ||||
| Current consumption | 1-output models:
16 mA max. |
1-output models: 16 mA max.,
2-output models: 20 mA max. |
|||
| Output configuration | B[] Models: PNP open collector, C[] Models: NPN open collector | ||||
| Operation mode
(with sensing object approaching) |
1-output models (B1,
C1): NO (Normally open), 1-output models (B2, C2): NC (Normally closed) |
1-output models (B1, C1): NO (Normally open),
1-output models (B2, C2): NC (Normally closed), 2-output models (B3, C3): NO+NC (Normally open, Normally closed) |
|||
| Control
output |
Load current | 1-output models:
10 to 30 VDC, Class 2, 100 mA max. |
1-output models:
10 to 30 VDC, Class 2, 100 mA max., 2-output models: 10 to 30 VDC, Class 2, 50 mA max. |
||
| Residual voltage | 1-output models: 2 V
max. (Load current: 100 mA, Cable length: 2 m) |
1-output models:
2 V max. (Load current: 100 mA, Cable length: 2 m), 2-output models: 2 V max. (Load current: 50 mA, Cable length: 2 m) |
|||
| Indicator *2 | In the Standard I/O mode (SIO mode): Operation indicator (orange, lit) and
communication indicator (green, not lit) In the IO-Link communication mode (COM mode): Operation indicator (orange, lit) and communication indicator (green, blinking at 1 s intervals) |
||||
| Protection circuits | Power supply reverse polarity protection, Surge suppressor, Output short-circuit
protection, Output reverse polarity protection |
||||
| Ambient temperature range | Operating/Storage: -25 to 70°C (with no icing or condensation) | ||||
| Ambient humidity range | Operating/Storage: 35% to 95% (with no condensation) | ||||
| Temperature influence | ±10% max. of sensing distance at 23°C in the temperature range of -25 to 70°C | ||||
| Voltage influence | ±1% max. of sensing distance at rated voltage in the rated voltage ±15% range | ||||
| Insulation resistance | 50 MΩ min. (at 500 VDC) between current-carrying parts and case | ||||
| Dielectric strength | 1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case | ||||
| Vibration resistance
(destruction) |
10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions | ||||
| Shock resistance
(destruction) |
500 m/s2 10 times
each in X, Y, and Z directions |
1,000 m/s2 10 times each in X, Y, and Z directions | |||
| Degree of protection | Pre-wired Models, Pre-wired Connector Models: IEC 60529: IP67, ISO 20653 (old
standard: DIN 40050 PART9): IP69K, JIS C 0920 Annex 1: IP67G, Passed OMRON's Oil-resistant Component Evaluation Standards *3 (Cutting oil type: specified in JIS K 2241: 2000; Temperature: 35°C max.) Connector Models: IEC 60529: IP67, ISO 20653 (old standard: DIN 40050 PART9): IP69K |
||||
| Connection method | Pre-wired Models (Standard cable length: 2 m), Pre-wired Connector Models (Standard
cable length: 0.3 m) and Connector Models (M12 Connector, M8 (4-pin) Connector and M8 (3-pin) Connector) |
||||
| Weight*4
(packed state) |
Pre-wired | Approx. 85 g | Approx. 95 g | Approx. 180 g | Approx. 260 g |
| M12 Pre-wired
Smartclick Connector |
Approx. 55 g | Approx. 70 g | Approx. 115 g | Approx. 200 g | |
| Connector | Approx. 40 g
(M8/M12 Connector) |
Approx. 55 g | Approx. 95 g | Approx. 180 g | |
| Materials | Case | Nickel-plated brass | |||
| Sensing surface | Polybutylene terephthalat (PBT) | ||||
| Clamping nuts | Nickel-plated brass | ||||
| Toothed washers | Zinc-plated iron | ||||
| Cable | Vinyl chloride (PVC)
Note: Material of Pre-wired Models and Pre-wired Connector Models. |
||||
| Main IO-Link functions*2 | Operation mode switching between NO and NC, self diagnosis enabling, excessive
proximity judgment distance selecting, timer function of the control output and timer time selecting, instability output (IO-Link mode) ON delay timer time selecting function, monitor output, operating hours read-out, readout of the sensor internal temperature, and initial reset |
||||
| IO-Link
Commun- ication specifica- tions *2 |
IO-Link
specification |
Ver 1.1 | |||
| Baud rate | COM2 (38.4 kbps), COM3 (230.4 kbps) | ||||
| Data length | PD size: 2 bytes, OD size: 1 byte (M-sequence type: TYPE_2_2) | ||||
| Minimum cycle
time |
COM2: 2.3 ms, COM3: 0.4 ms | ||||
| Accessories | Instruction manual, Clamping nuts, Toothed washer | ||||
*1. The response frequency is an average value. Measurement conditions are as follows: standard sensing object, a
distance of twice the standard sensing object, and a set distance of half the sensing distance.
*2. IO-Link is not supported for NC-type PNP outputs or all types of NPN outputs.
*3. The Oil-resistant Component Evaluation Standards are OMRON's own durability evaluation standards.
2-year oil resistance indicates the median value of the product design and the oil-resistance performance criterion result
(=Typical value).
The Pre-wired Connector Model verifies 2 years of oil resistance when mating with Round Oil-resistant Connectors XS5
NEXT series correctly.
The degree of protection is not satisfied with the part where cable wires are uncovered for the Pre-wired Models.
*4. Weight of the standard body-sized model.
distance of twice the standard sensing object, and a set distance of half the sensing distance.
*2. IO-Link is not supported for NC-type PNP outputs or all types of NPN outputs.
*3. The Oil-resistant Component Evaluation Standards are OMRON's own durability evaluation standards.
2-year oil resistance indicates the median value of the product design and the oil-resistance performance criterion result
(=Typical value).
The Pre-wired Connector Model verifies 2 years of oil resistance when mating with Round Oil-resistant Connectors XS5
NEXT series correctly.
The degree of protection is not satisfied with the part where cable wires are uncovered for the Pre-wired Models.
*4. Weight of the standard body-sized model.
DC 3-wire (Quadruple/Triple distance model)
Unshielded
| Types | Quadruple distance model | ||||
|---|---|---|---|---|---|
| Size | M8 | M12 | M18 | M30 | |
| Model | E2E-X8M[]8 | E2E-X16M[]12 | E2E-X30M[]18 | E2E-X50M[]30 | |
| Sensing distance | 8 mm±10% | 16 mm±10% | 30 mm±10% | 50 mm±10% | |
| Setting distance | 0 to 6 mm | 0 to 12.2 mm | 0 to 23 mm | 0 to 38.2 mm | |
| Differential travel | 15% max. of sensing distance | ||||
| Detectable object | Ferrous metals (For non-ferrous metals, refer to the Engineering Data on Catalog.) | ||||
| Standard sensing object | Iron,
24 × 24 × 1 mm |
Iron,
48 × 48 × 1 mm |
Iron,
90 × 90 × 1 mm |
Iron,
150 × 150 × 1 mm |
|
| Response frequency *1 | 500 Hz | 400 Hz | 200 Hz | 100 Hz | |
| Power supply voltage | 10 to 30 VDC (including 10% ripple (p-p)), Class 2 | ||||
| Current consumption | 1-output models: 16 mA max. | ||||
| Output configuration | B[] Models: PNP open collector
C[] Models: NPN open collector |
||||
| Operation mode
(with sensing object approaching) |
1-output models (B1, C1): NO (Normally open),
1-output models (B2, C2): NC (Normally closed) |
||||
| Control
output |
Load current | 1-output models:
10 to 30 VDC, Class 2, 50 mA max. |
|||
| Residual voltage | 1-output models:
2 V max. (Load current: 50 mA, Cable length: 2 m) |
||||
| Indicator *2 | In the Standard I/O mode (SIO mode): Operation indicator (orange, lit) and
communication indicator (green, not lit) In the IO-Link communication mode (COM mode): Operation indicator (orange, lit) and communication indicator (green, blinking at 1 s intervals) |
||||
| Protection circuits | Power supply reverse polarity protection, Surge suppressor, Output short-circuit
protection, Output reverse polarity protection |
||||
| Ambient temperature range | Operating/Storage: -25 to 70°C (with no icing or condensation) | ||||
| Ambient humidity range | Operating/Storage: 35% to 95% (with no condensation) | ||||
| Temperature influence | ±15% max. of sensing distance at 23°C in the temperature range of -25 to 70°C | ||||
| Voltage influence | ±1% max. of sensing distance at rated voltage in the rated voltage ±15% range | ||||
| Insulation resistance | 50 MΩ min. (at 500 VDC) between current-carrying parts and case | ||||
| Dielectric strength | 1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case | ||||
| Vibration resistance
(destruction) |
10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions | ||||
| Shock resistance
(destruction) |
500 m/s2 10 times
each in X, Y, and Z directions |
1,000 m/s2 10 times each in X, Y, and Z directions | |||
| Degree of protection | Pre-wired Models, Pre-wired Connector Models: IEC 60529:IP67, ISO 20653 (old
standard: DIN 40050 PART9): IP69K, JIS C 0920 Annex 1: IP67G, Passed OMRON's Oil-resistant Component Evaluation Standards *3 (Cutting oil type: specified in JIS K 2241: 2000; Temperature: 35°C max.) Connector Models: IEC 60529: IP67, ISO 20653 (old standard: DIN 40050 PART9): IP69K |
||||
| Connection method | Pre-wired Models (Standard cable length: 2 m), Pre-wired Connector Models
(Standard cable length: 0.3 m) and Connector Models (M12 Connector, M8 (4-pin) Connector and M8 (3-pin) Connector) |
||||
| Weight*4
(packed state) |
Pre-wired | Approx. 85 g | Approx. 95 g | Approx. 190 g | Approx. 310 g |
| M12 Pre-wired
Smartclick Connector |
Approx. 55 g | Approx. 70 g | Approx. 125 g | Approx. 250 g | |
| Connector | Approx. 40 g
(M8/M12 Connector) |
Approx. 55 g | Approx. 105 g | Approx. 230 g | |
| Materials | Case | Stainless (SUS303) | Nickel-plated brass | ||
| Sensing surface | Polybutylene terephthalat (PBT) | ||||
| Clamping nuts | Nickel-plated brass | ||||
| Toothed washers | Zinc-plated iron | ||||
| Cable | Vinyl chloride (PVC)
Note: Material of Pre-wired Models and Pre-wired Connector Models. |
||||
| Main IO-Link functions*2 | Operation mode switching between NO and NC, self diagnosis enabling, excessive
proximity judgment distance selecting, timer function of the control output and timer time selecting, instability output (IO-Link mode) ON delay timer time selecting function, monitor output, operating hours read-out, readout of the sensor internal temperature, and initial reset |
||||
| IO-Link
Commun- ication specifica- tions *2 |
IO-Link
specification |
Ver1.1 | |||
| Baud rate | COM2 (38.4 kbps), COM3 (230.4 kbps) | ||||
| Data length | PD size: 2 bytes, OD size: 1 byte (M-sequence type: TYPE_2_2) | ||||
| Minimum cycle
time |
COM2: 2.3 ms, COM3: 0.4 ms | ||||
| Accessories | Instruction manual, Clamping nuts, Toothed washer | ||||
| Types | Triple distance model | ||||
|---|---|---|---|---|---|
| Size | M8 | M12 | M18 | M30 | |
| Model | E2E-X6M[]8 | E2E-X10M[]12 | E2E-X20M[]18 | E2E-X40M[]30 | |
| Sensing distance | 6 mm±10% | 10 mm±10% | 20 mm±10% | 40 mm±10% | |
| Setting distance | 0 to 4.8 mm | 0 to 8 mm | 0 to 16 mm | 0 to 32 mm | |
| Differential travel | 15% max. of sensing distance | ||||
| Detectable object | Ferrous metals (For non-ferrous metals, refer to the Engineering Data on Catalog.) | ||||
| Standard sensing object | Iron,
18 × 18 × 1 mm |
Iron,
30 × 30 × 1 mm |
Iron,
60 × 60 × 1 mm |
Iron,
120 × 120 × 1 mm |
|
| Response frequency *1 | 800 Hz | 400 Hz | 200 Hz | 100 Hz | |
| Power supply voltage | 10 to 30 VDC (including 10% ripple (p-p)), Class 2 | ||||
| Current consumption | 1-output models:
16 mA max. |
1-output models: 16 mA max.,
2-output models: 20 mA max. |
|||
| Output configuration | B[] Models: PNP open collector
C[] Models: NPN open collector |
||||
| Operation mode
(with sensing object approaching) |
1-output models (B1,
C1): NO (Normally open), 1-output models (B2, C2): NC (Normally closed) |
1-output models (B1, C1): NO (Normally open),
1-output models (B2, C2): NC (Normally closed), 2-output models (B3, C3): NO+NC (Normally open, Normally closed) |
|||
| Control
output |
Load current | 1-output models:
10 to 30 VDC, Class 2, 100 mA max. |
1-output models: 10 to 30 VDC, Class 2, 100 mA max.,
2-output models: 10 to 30 VDC, Class 2, 50 mA max. |
||
| Residual voltage | 1-output models: 2 V
max. (Load current: 100 mA, Cable length: 2 m) |
1-output models:
2 V max. (Load current: 100 mA, Cable length: 2 m), 2-output models: 2 V max. (Load current: 50 mA, Cable length: 2 m) |
|||
| Indicator *2 | In the Standard I/O mode (SIO mode): Operation indicator (orange, lit) and
communication indicator (green, not lit) In the IO-Link communication mode (COM mode): Operation indicator (orange, lit) and communication indicator (green, blinking at 1 s intervals) |
||||
| Protection circuits | Power supply reverse polarity protection, Surge suppressor, Output short-circuit
protection, Output reverse polarity protection |
||||
| Ambient temperature range | Operating/Storage: -25 to 70°C (with no icing or condensation) | ||||
| Ambient humidity range | Operating/Storage: 35% to 95% (with no condensation) | ||||
| Temperature influence | ±10% max. of sensing distance at 23°C in the temperature range of -25 to 70°C | ||||
| Voltage influence | ±1% max. of sensing distance at rated voltage in the rated voltage ±15% range | ||||
| Insulation resistance | 50 MΩ min. (at 500 VDC) between current-carrying parts and case | ||||
| Dielectric strength | 1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case | ||||
| Vibration resistance
(destruction) |
10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions | ||||
| Shock resistance
(destruction) |
500 m/s2 10 times
each in X, Y, and Z directions |
1,000 m/s2 10 times each in X, Y, and Z directions | |||
| Degree of protection | Pre-wired Models, Pre-wired Connector Models: IEC 60529:IP67, ISO 20653 (old
standard: DIN 40050 PART9): IP69K, JIS C 0920 Annex 1: IP67G, Passed OMRON's Oil-resistant Component Evaluation Standards *3 (Cutting oil type: specified in JIS K 2241: 2000; Temperature: 35°C max.) Connector Models: IEC 60529: IP67, ISO 20653 (old standard: DIN 40050 PART9): IP69K |
||||
| Connection method | Pre-wired Models (Standard cable length: 2 m), Pre-wired Connector Models
(Standard cable length: 0.3 m) and Connector Models (M12 Connector, M8 (4-pin) Connector and M8 (3-pin) Connector) |
||||
| Weight*4
(packed state) |
Pre-wired | Approx. 85 g | Approx. 95 g | Approx. 190 g | Approx. 280 g |
| M12 Pre-wired
Smartclick Connector |
Approx. 55 g | Approx. 70 g | Approx. 125 g | Approx. 220 g | |
| Connector | Approx. 40 g
(M8/M12 Connector) |
Approx. 55 g | Approx. 105 g | Approx. 200 g | |
| Materials | Case | Stainless (SUS303) | Nickel-plated brass | ||
| Sensing surface | Polybutylene terephthalat (PBT) | ||||
| Clamping nuts | Nickel-plated brass | ||||
| Toothed washers | Zinc-plated iron | ||||
| Cable | Vinyl chloride (PVC)
Note: Material of Pre-wired Models and Pre-wired Connector Models. |
||||
| Main IO-Link functions*2 | Operation mode switching between NO and NC, self diagnosis enabling, excessive
proximity judgment distance selecting, timer function of the control output and timer time selecting, instability output (IO-Link mode) ON delay timer time selecting function, monitor output, operating hours read-out, readout of the sensor internal temperature, and initial reset |
||||
| IO-Link
Commun- ication specifica- tions *2 |
IO-Link
specification |
Ver1.1 | |||
| Baud rate | COM2 (38.4 kbps), COM3 (230.4 kbps) | ||||
| Data length | PD size: 2 bytes, OD size: 1 byte (M-sequence type: TYPE_2_2) | ||||
| Minimum cycle
time |
COM2: 2.3 ms, COM3: 0.4 ms | ||||
| Accessories | Instruction manual, Clamping nuts, Toothed washer | ||||
*1. The response frequency is an average value. Measurement conditions are as follows: standard sensing object, a
distance of twice the standard sensing object, and a set distance of half the sensing distance.
*2. IO-Link is not supported for NC-type PNP outputs or all types of NPN outputs.
*3. The Oil-resistant Component Evaluation Standards are OMRON's own durability evaluation standards. 2-year oil
resistance indicates the median value of the product design and the oil-resistance performance criterion result (=Typical
value). Actual performance can be expected to decline after two years on average from shipment. The Pre-wired
Connector Model verifies 2 years of oil resistance when mating with Round Oil-resistant Connectors XS5 NEXT series
correctly. The degree of protection is not satisfied with the part where cable wires are uncovered for the Pre-wired
Models.
*4. Weight of the standard body-sized model.
distance of twice the standard sensing object, and a set distance of half the sensing distance.
*2. IO-Link is not supported for NC-type PNP outputs or all types of NPN outputs.
*3. The Oil-resistant Component Evaluation Standards are OMRON's own durability evaluation standards. 2-year oil
resistance indicates the median value of the product design and the oil-resistance performance criterion result (=Typical
value). Actual performance can be expected to decline after two years on average from shipment. The Pre-wired
Connector Model verifies 2 years of oil resistance when mating with Round Oil-resistant Connectors XS5 NEXT series
correctly. The degree of protection is not satisfied with the part where cable wires are uncovered for the Pre-wired
Models.
*4. Weight of the standard body-sized model.
BASIC Model
DC 3-wire (Double/Single distance model)
Shielded
| Types | Double distance model | ||||
|---|---|---|---|---|---|
| Size | M8 | M12 | M18 | M30 | |
| Model | E2E-X2[]8 | E2E-X4[]12 | E2E-X8[]18 | E2E-X15[]30 | |
| Sensing distance | 2 mm±10% | 4 mm±10% | 8 mm±10% | 15 mm±10% | |
| Setting distance | 0 to 1.6 mm | 0 to 3.2 mm | 0 to 6.4 mm | 0 to 12 mm | |
| Differential travel | 15% max. of sensing distance | ||||
| Detectable object | Ferrous metals (For non-ferrous metals, refer to the Engineering Data on Catalog.) | ||||
| Standard sensing object | Iron,
8 × 8 × 1 mm |
Iron,
12 × 12 × 1 mm |
Iron,
24 × 24 × 1 mm |
Iron,
45 × 45 × 1 mm |
|
| Response frequency *1 | 1,500 Hz | 1,000 Hz | 500 Hz | 250 Hz | |
| Power supply voltage | 10 to 30 VDC (including 10% ripple (p-p)), Class 2 | ||||
| Current consumption | 1-output models: 16 mA max.
2-output models: 20 mA max. |
||||
| Output configuration | B[] Models: PNP open collector
C[] Models: NPN open collector |
||||
| Operation mode
(with sensing object approaching) |
1-output models (B1, C1): NO (Normally open),
1-output models (B2, C2): NC (Normally closed), 2-output models (B3, C3): NO+NC (Normally open, Normally closed) *3 |
||||
| Control
output |
Load current | 1-output models:
10 to 30 VDC, Class 2, 200 mA max., (-40 to 70°C), 100 mA max., (70 to 85°C) 2-output models: 10 to 30 VDC, Class 2, 50 mA max. |
1-output models:
10 to 30 VDC, Class 2, 200 mA max., 2-output models: 10 to 30 VDC, Class 2, 100 mA max. |
||
| Residual voltage | 1-output models:
2 V max. (Load current: 200 mA, Cable length: 2 m), 2-output models: 2 V max. (Load current: 50 mA, Cable length: 2 m) |
1-output models:
2 V max. (Load current: 200 mA, Cable length: 2 m), 2-output models: 2 V max. (Load current: 100 mA, Cable length: 2 m) |
|||
| Indicator *2 | In the Standard I/O mode (SIO mode): Operation indicator (orange, lit) and
communication indicator (green, not lit) In the IO-Link communication mode (COM mode): Operation indicator (orange, lit) and communication indicator (green, blinking at 1 s intervals) |
||||
| Protection circuits | Power supply reverse polarity protection, Surge suppressor, Output short-circuit
protection, Output reverse polarity protection |
||||
| Ambient temperature range | Operating/Storage: -40 to 85°C (with no icing or condensation)
Note: The UL temperature rating for M12 Pre-wired Connector Models is -25 to 70°C. |
||||
| Ambient humidity range | Operating/Storage: 35% to 95% (with no condensation) | ||||
| Temperature influence | ±15% max. of sensing distance at 23°C in the temperature range of -40 to 85°C
±10% max. of sensing distance at 23°C in the temperature range of -25 to 70°C |
||||
| Voltage influence | ±1% max. of sensing distance at rated voltage in the rated voltage ±15% range | ||||
| Insulation resistance | 50 MΩ min. (at 500 VDC) between current-carrying parts and case | ||||
| Dielectric strength | 1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case | ||||
| Vibration resistance
(destruction) |
10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions | ||||
| Shock resistance
(destruction) |
500 m/s2 10 times
each in X, Y, and Z directions |
1,000 m/s2 10 times each in X, Y, and Z directions | |||
| Degree of protection | Pre-wired Models, Pre-wired Connector Models: IEC 60529:IP67, ISO 20653 (old
standard: DIN 40050 PART9): IP69K, JIS C 0920 Annex 1: IP67G, Passed OMRON's Oil-resistant Component Evaluation Standards *4 (Cutting oil type: specified in JIS K 2241:2000; Temperature: 35°C max.) Connector Models: IEC 60529: IP67, ISO 20653 (old standard: DIN 40050 PART9): IP69K |
||||
| Connection method | Pre-wired Models (Standard cable length: 2 m), Pre-wired Connector Models
(Standard cable length: 0.3 m) and Connector Models (M12 Connector, M8 (4-pin) Connector and M8 (3-pin) Connector) |
||||
| Weight *5
(packed state) |
Pre-wired | Approx. 85 g | Approx. 95 g | Approx. 170 g | Approx. 240 g |
| M12 Pre-wired
Smartclick Connector |
Approx. 55 g | Approx. 70 g | Approx. 105 g | Approx. 170 g | |
| Connector | Approx. 40 g
(M8/M12 Connector) |
Approx. 55 g | Approx. 85 g | Approx. 160 g | |
| Materials | Case | Stainless (SUS303) | Nickel-plated brass | ||
| Sensing surface | Polybutylene terephthalat (PBT) | ||||
| Clamping nuts | Nickel-plated brass | ||||
| Toothed washers | Zinc-plated iron | ||||
| Cable | Vinyl chloride (PVC)
Note: Material of Pre-wired Models and Pre-wired Connector Models. |
||||
| Main IO-Link functions *2 | Operation mode switching between NO and NC, self diagnosis enabling, excessive
proximity judgment distance selecting, timer function of the control output and timer time selecting, instability output (IO-Link mode) ON delay timer time selecting function, monitor output, operating hours read-out, readout of the sensor internal temperature, and initial reset |
||||
| IO-Link
Commun- ication specifica- tions *2 |
IO-Link
specification |
Ver1.1 | |||
| Baud rate | COM2 (38.4 kbps), COM3 (230.4 kbps) | ||||
| Data length | PD size: 2 bytes, OD size: 1 byte (M-sequence type: TYPE_2_2) | ||||
| Minimum cycle
time |
COM2: 2.3 ms, COM3: 0.4 ms | ||||
| Accessories | Instruction manual, Clamping nuts, Toothed washer | ||||
| Types | Single distance model | ||||
|---|---|---|---|---|---|
| Size | M8 | M12 | M18 | M30 | |
| Model | E2E-X1R5[]8 | E2E-X2[]12 | E2E-X5[]18 | E2E-X10[]30 | |
| Sensing distance | 1.5 mm±10% | 2 mm±10% | 5 mm±10% | 10 mm±10% | |
| Setting distance | 0 to 1.2 mm | 0 to 1.6 mm | 0 to 4 mm | 0 to 8 mm | |
| Differential travel | 10% max. of sensing distance | ||||
| Detectable object | Ferrous metals (For non-ferrous metals, refer to the Engineering Data on Catalog.) | ||||
| Standard sensing object | Iron,
8 × 8 × 1 mm |
Iron,
12 × 12 × 1 mm |
Iron,
18 × 18 × 1 mm |
Iron,
30 × 30 × 1 mm |
|
| Response frequency *1 | 2,000 Hz | 1,500 Hz | 600 Hz | 400 Hz | |
| Power supply voltage | 10 to 30 VDC (including 10% ripple (p-p)), Class 2 | ||||
| Current consumption | 1-output models: 16 mA max.
2-output models: 20 mA max. |
||||
| Output configuration | B[] Models: PNP open collector
C[] Models: NPN open collector |
||||
| Operation mode
(with sensing object approaching) |
1-output models (B1, C1): NO (Normally open),
1-output models (B2, C2): NC (Normally closed), 2-output models (B3, C3): NO+NC (Normally open, Normally closed) *3 |
||||
| Control
output |
Load current | 1-output models:
10 to 30 VDC, Class 2, 200 mA max., (-40 to 70°C), 100 mA max., (70 to 85°C) 2-output models: 10 to 30 VDC, Class 2, 50 mA max. |
1-output models:
10 to 30 VDC, Class 2, 200 mA max., 2-output models: 10 to 30 VDC, Class 2, 100 mA max. |
||
| Residual voltage | 1-output models:
2 V max. (Load current: 200 mA, Cable length: 2 m), 2-output models: 2 V max. (Load current: 50 mA, Cable length: 2 m) |
1-output models:
2 V max. (Load current: 200 mA, Cable length: 2 m), 2-output models: 2 V max. (Load current: 100 mA, Cable length: 2 m) |
|||
| Indicator *2 | In the Standard I/O mode (SIO mode): Operation indicator (orange, lit) and
communication indicator (green, not lit) In the IO-Link communication mode (COM mode): Operation indicator (orange, lit) and communication indicator (green, blinking at 1 s intervals) |
||||
| Protection circuits | Power supply reverse polarity protection, Surge suppressor, Output short-circuit
protection, Output reverse polarity protection |
||||
| Ambient temperature range | Operating/Storage: -40 to 85°C (with no icing or condensation)
Note: The UL temperature rating for M12 Pre-wired Connector Models is -25 to 70°C. |
||||
| Ambient humidity range | Operating/Storage: 35% to 95% (with no condensation) | ||||
| Temperature influence | ±15% max. of sensing distance at 23°C in the temperature range of -40 to 85°C
±10% max. of sensing distance at 23°C in the temperature range of -25 to 70°C |
||||
| Voltage influence | ±1% max. of sensing distance at rated voltage in the rated voltage ±15% range | ||||
| Insulation resistance | 50 MΩ min. (at 500 VDC) between current-carrying parts and case | ||||
| Dielectric strength | 1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case | ||||
| Vibration resistance
(destruction) |
10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions | ||||
| Shock resistance
(destruction) |
500 m/s2 10 times
each in X, Y, and Z directions |
1,000 m/s2 10 times each in X, Y, and Z directions | |||
| Degree of protection | Pre-wired Models, Pre-wired Connector Models: IEC 60529:IP67, ISO 20653 (old
standard: DIN 40050 PART9): IP69K, JIS C 0920 Annex 1: IP67G, Passed OMRON's Oil-resistant Component Evaluation Standards *4 (Cutting oil type: specified in JIS K 2241:2000; Temperature: 35°C max.) Connector Models: IEC 60529: IP67, ISO 20653 (old standard: DIN 40050 PART9): IP69K |
||||
| Connection method | Pre-wired Models (Standard cable length: 2 m), Pre-wired Connector Models
(Standard cable length: 0.3 m) and Connector Models (M12 Connector, M8 (4-pin) Connector and M8 (3-pin) Connector) |
||||
| Weight *5
(packed state) |
Pre-wired | Approx. 85 g | Approx. 95 g | Approx. 170 g | Approx. 240 g |
| M12 Pre-wired
Smartclick Connector |
Approx. 55 g | Approx. 70 g | Approx. 105 g | Approx. 170 g | |
| Connector | Approx. 40 g
(M8/M12 Connector) |
Approx. 55 g | Approx. 85 g | Approx. 160 g | |
| Materials | Case | Stainless (SUS303) | Nickel-plated brass | ||
| Sensing surface | Polybutylene terephthalat (PBT) | ||||
| Clamping nuts | Nickel-plated brass | ||||
| Toothed washers | Zinc-plated iron | ||||
| Cable | Vinyl chloride (PVC)
Note: Material of Pre-wired Models and Pre-wired Connector Models. |
||||
| Main IO-Link functions *2 | Operation mode switching between NO and NC, self diagnosis enabling, excessive
proximity judgment distance selecting, timer function of the control output and timer time selecting, instability output (IO-Link mode) ON delay timer time selecting function, monitor output, operating hours read-out, readout of the sensor internal temperature, and initial reset |
||||
| IO-Link
Commun- ication specifica- tions *2 |
IO-Link
specification |
Ver1.1 | |||
| Baud rate | COM2 (38.4 kbps), COM3 (230.4 kbps) | ||||
| Data length | PD size: 2 bytes, OD size: 1 byte (M-sequence type: TYPE_2_2) | ||||
| Minimum cycle
time |
COM2: 2.3 ms, COM3: 0.4 ms | ||||
| Accessories | Instruction manual, Clamping nuts, Toothed washer | ||||
*1. The response frequency is an average value. Measurement conditions are as follows: standard sensing object, a
distance of twice the standard sensing object, and a set distance of half the sensing distance.
*2. IO-Link is not supported for NC-type PNP outputs or all types of NPN outputs.
*3. Dual-output specification for the M8-size models is only applicable to long-size M12 Connector models.
*4. The Oil-resistant Component Evaluation Standards are OMRON's own durability evaluation standards. 2-year oil
resistance indicates the median value of the product design and the oil-resistance performance criterion result (=Typical
value). Actual performance can be expected to decline after two years on average from shipment. The Pre-wired
Connector Model verifies 2 years of oil resistance when mating with Round Oil-resistant Connectors XS5 NEXT series
correctly. The degree of protection is not satisfied with the part where cable wires are uncovered for the Pre-wired
Models.
*5. Weight of the standard body-sized model.
distance of twice the standard sensing object, and a set distance of half the sensing distance.
*2. IO-Link is not supported for NC-type PNP outputs or all types of NPN outputs.
*3. Dual-output specification for the M8-size models is only applicable to long-size M12 Connector models.
*4. The Oil-resistant Component Evaluation Standards are OMRON's own durability evaluation standards. 2-year oil
resistance indicates the median value of the product design and the oil-resistance performance criterion result (=Typical
value). Actual performance can be expected to decline after two years on average from shipment. The Pre-wired
Connector Model verifies 2 years of oil resistance when mating with Round Oil-resistant Connectors XS5 NEXT series
correctly. The degree of protection is not satisfied with the part where cable wires are uncovered for the Pre-wired
Models.
*5. Weight of the standard body-sized model.
DC 3-wire (Double/Single distance model)
Unshielded
| Types | Double distance model | ||||
|---|---|---|---|---|---|
| Size | M8 | M12 | M18 | M30 | |
| Model | E2E-X4M[]8 | E2E-X8M[]12 | E2E-X16M[]18 | E2E-X30M[]30 | |
| Sensing distance | 4 mm±10% | 8 mm±10% | 16 mm±10% | 30 mm±10% | |
| Setting distance | 0 to 3.2 mm | 0 to 6.4 mm | 0 to 12.8 mm | 0 to 24 mm | |
| Differential travel | 15% max. of sensing distance | ||||
| Detectable object | Ferrous metals (For non-ferrous metals, refer to the Engineering Data on Catalog.) | ||||
| Standard sensing object | Iron,
12 × 12 × 1 mm |
Iron,
24 × 24 × 1 mm |
Iron,
48 × 48 × 1 mm |
Iron,
90 × 90 × 1 mm |
|
| Response frequency *1 | 1,000 Hz | 800 Hz | 400 Hz | 100 Hz | |
| Power supply voltage | 10 to 30 VDC (including 10% ripple (p-p)), Class 2 | ||||
| Current consumption | 1-output models: 16 mA max.
2-output models: 20 mA max. |
||||
| Output configuration | B[] Models: PNP open collector
C[] Models: NPN open collector |
||||
| Operation mode
(with sensing object approaching) |
1-output models (B1, C1): NO (Normally open),
1-output models (B2, C3): NC (Normally closed) 2-output models (B3, C3): NO+NC (Normally open, Normally closed) *3 |
||||
| Control
output |
Load current | 1-output models:
10 to 30 VDC, Class 2, 200 mA max., (-40 to 70°C), 100 mA max., (70 to 85°C) 2-output models: 10 to 30 VDC, Class 2, 50 mA max. |
1-output models:
10 to 30 VDC, Class 2, 200 mA max., 2-output models: 10 to 30 VDC, Class 2, 100 mA max. |
||
| Residual voltage | 1-output models:
2 V max. (Load current: 200 mA, Cable length: 2 m), 2-output models: 2 V max. (Load current: 50 mA, Cable length: 2 m) |
1-output models:
2 V max. (Load current: 200 mA, Cable length: 2 m), 2-output models: 2 V max. (Load current: 100 mA, Cable length: 2 m) |
|||
| Indicator *2 | In the Standard I/O mode (SIO mode): Operation indicator (orange, lit) and
communication indicator (green, not lit) In the IO-Link communication mode (COM mode): Operation indicator (orange, lit) and communication indicator (green, blinking at 1 s intervals) |
||||
| Protection circuits | Power supply reverse polarity protection, Surge suppressor, Output short-circuit
protection, Output reverse polarity protection |
||||
| Ambient temperature range | Operating/Storage: -40 to 85°C (with no icing or condensation)
Note: The UL temperature rating for M12 Pre-wired Connector Models is -25 to 70°C. |
||||
| Ambient humidity range | Operating/Storage: 35% to 95% (with no condensation) | ||||
| Temperature influence | ±15% max. of sensing distance at 23°C in the temperature range of -40 to 85°C
±10% max. of sensing distance at 23°C in the temperature range of -25 to 70°C |
||||
| Voltage influence | ±1% max. of sensing distance at rated voltage in the rated voltage ±15% range | ||||
| Insulation resistance | 50 MΩ min. (at 500 VDC) between current-carrying parts and case | ||||
| Dielectric strength | 1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case | ||||
| Vibration resistance
(destruction) |
10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions | ||||
| Shock resistance
(destruction) |
500 m/s2 10 times
each in X, Y, and Z directions |
1,000 m/s2 10 times each in X, Y, and Z directions | |||
| Degree of protection | Pre-wired Models, Pre-wired Connector Models: IEC 60529:IP67, ISO 20653 (old
standard: DIN 40050 PART9): IP69K, JIS C 0920 Annex 1: IP67G, Passed OMRON's Oil-resistant Component Evaluation Standards *4 (Cutting oil type: specified in JIS K 2241:2000; Temperature: 35°C max.) Connector Models: IEC 60529:IP67, ISO 20653 (old standard: DIN 40050 PART9): IP69K |
||||
| Connection method | Pre-wired Models (Standard cable length: 2 m), Pre-wired Connector Models
(Standard cable length: 0.3 m) and Models (M12 Connector, M8 (4-pin) Connector and M8 (3-pin) Connector) |
||||
| Weight *5
(packed state) |
Pre-wired | Approx. 85 g | Approx. 95 g | Approx. 170 g | Approx. 280 g |
| M12 Pre-wired
Smartclick Connector |
Approx. 55 g | Approx. 70 g | Approx. 105 g | Approx. 220 g | |
| Connector | Approx. 40 g
(M8/M12 Connector) |
Approx. 55 g | Approx. 85 g | Approx. 200 g | |
| Materials | Case | Stainless (SUS303) | Nickel-plated brass | ||
| Sensing surface | Polybutylene terephthalat (PBT) | ||||
| Clamping nuts | Nickel-plated brass | ||||
| Toothed washers | Zinc-plated iron | ||||
| Cable | Vinyl chloride (PVC)
Note: Material of Pre-wired Models and Pre-wired Connector Models. |
||||
| Main IO-Link functions *2 | Operation mode switching between NO and NC, self diagnosis enabling, excessive
proximity judgment distance selecting, timer function of the control output and timer time selecting, instability output (IO-Link mode) ON delay timer time selecting function, monitor output, operating hours read-out, readout of the sensor internal temperature, and initial reset |
||||
| IO-Link
Commun- ication specifica- tions *2 |
IO-Link
specification |
Ver 1.1 | |||
| Baud rate | COM2 (38.4 kbps), COM3 (230.4 kbps) | ||||
| Data length | PD size: 2 bytes, OD size: 1 byte (M-sequence type: TYPE_2_2) | ||||
| Minimum cycle
time |
COM2: 2.3 ms, COM3: 0.4 ms | ||||
| Accessories | Instruction manual, Clamping nuts, Toothed washer | ||||
| Types | Single distance model | ||||
|---|---|---|---|---|---|
| Size | M8 | M12 | M18 | M30 | |
| Model | E2E-X2M[]8 | E2E-X5M[]12 | E2E-X10M[]18 | E2E-X18M[]30 | |
| Sensing distance | 2 mm±10% | 5 mm±10% | 10 mm±10% | 18 mm±10% | |
| Setting distance | 0 to 1.6 mm | 0 to 4 mm | 0 to 8 mm | 0 to 14.4 mm | |
| Differential travel | 10% max. of sensing distance | ||||
| Detectable object | Ferrous metals (For non-ferrous metals, refer to the Engineering Data on Catalog.) | ||||
| Standard sensing object | Iron,
8 × 8 × 1 mm |
Iron,
15 × 15 × 1 mm |
Iron,
30 × 30 × 1 mm |
Iron,
54 × 54 × 1 mm |
|
| Response frequency *1 | 1,000 Hz | 800 Hz | 400 Hz | 100 Hz | |
| Power supply voltage | 10 to 30 VDC (including 10% ripple (p-p)), Class 2 | ||||
| Current consumption | 1-output models: 16 mA max.
2-output models: 20 mA max. |
||||
| Output configuration | B[] Models: PNP open collector
C[] Models: NPN open collector |
||||
| Operation mode
(with sensing object approaching) |
1-output models (B1, C1): NO (Normally open),
1-output models (B2, C3): NC (Normally closed) 2-output models (B3, C3): NO+NC (Normally open, Normally closed) *3 |
||||
| Control
output |
Load current | 1-output models:
10 to 30 VDC, Class 2, 200 mA max., (-40 to 70°C), 100 mA max., (70 to 85°C) 2-output models: 10 to 30 VDC, Class 2, 50 mA max. |
1-output models:
10 to 30 VDC, Class 2, 200 mA max., 2-output models: 10 to 30 VDC, Class 2, 100 mA max. |
||
| Residual voltage | 1-output models:
2 V max. (Load current: 200 mA, Cable length: 2 m), 2-output models: 2 V max. (Load current: 50 mA, Cable length: 2 m) |
1-output models:
2 V max. (under load current of 200 mA with cable length of 2 m), 2-output models: 2 V max. (under load current of 100 mA with cable length of 2 m) |
|||
| Indicator *2 | In the Standard I/O mode (SIO mode): Operation indicator (orange, lit) and
communication indicator (green, not lit) In the IO-Link communication mode (COM mode): Operation indicator (orange, lit) and communication indicator (green, blinking at 1 s intervals) |
||||
| Protection circuits | Power supply reverse polarity protection, Surge suppressor, Output short-circuit
protection, Output reverse polarity protection |
||||
| Ambient temperature range | Operating/Storage: -40 to 85°C (with no icing or condensation)
Note: The UL temperature rating for M12 Pre-wired Connector Models is -25 to 70°C. |
||||
| Ambient humidity range | Operating/Storage: 35% to 95% (with no condensation) | ||||
| Temperature influence | ±15% max. of sensing distance at 23°C in the temperature range of -40 to 85°C
±10% max. of sensing distance at 23°C in the temperature range of -25 to 70°C |
||||
| Voltage influence | ±1% max. of sensing distance at rated voltage in the rated voltage ±15% range | ||||
| Insulation resistance | 50 MΩ min. (at 500 VDC) between current-carrying parts and case | ||||
| Dielectric strength | 1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case | ||||
| Vibration resistance
(destruction) |
10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions | ||||
| Shock resistance
(destruction) |
500 m/s2 10 times
each in X, Y, and Z directions |
1,000 m/s2 10 times each in X, Y, and Z directions | |||
| Degree of protection | Pre-wired Models, Pre-wired Connector Models: IEC 60529:IP67, ISO 20653 (old
standard: DIN 40050 PART9): IP69K, JIS C 0920 Annex 1: IP67G, Passed OMRON's Oil-resistant Component Evaluation Standards *4 (Cutting oil type: specified in JIS K 2241:2000; Temperature: 35°C max.) Connector Models: IEC 60529:IP67, ISO 20653 (old standard: DIN 40050 PART9): IP69K |
||||
| Connection method | Pre-wired Models (Standard cable length: 2 m), Pre-wired Connector Models
(Standard cable length: 0.3 m) and Models (M12 Connector, M8 (4-pin) Connector and M8 (3-pin) Connector) |
||||
| Weight *5
(packed state) |
Pre-wired | Approx. 85 g | Approx. 95 g | Approx. 170 g | Approx. 240 g |
| M12 Pre-wired
Smartclick Connector |
Approx. 55 g | Approx. 70 g | Approx. 105 g | Approx. 170 g | |
| Connector | Approx. 40 g
(M8/M12 Connector) |
Approx. 55 g | Approx. 85 g | Approx. 160 g | |
| Materials | Case | Stainless (SUS303) | Nickel-plated brass | ||
| Sensing surface | Polybutylene terephthalat (PBT) | ||||
| Clamping nuts | Nickel-plated brass | ||||
| Toothed washers | Zinc-plated iron | ||||
| Cable | Vinyl chloride (PVC)
Note: Material of Pre-wired Models and Pre-wired Connector Models. |
||||
| Main IO-Link functions *2 | Operation mode switching between NO and NC, self diagnosis enabling, excessive
proximity judgment distance selecting, timer function of the control output and timer time selecting, instability output (IO-Link mode) ON delay timer time selecting function, monitor output, operating hours read-out, readout of the sensor internal temperature, and initial reset |
||||
| IO-Link
Commun- ication specifica- tions *2 |
IO-Link
specification |
Ver 1.1 | |||
| Baud rate | COM2 (38.4 kbps), COM3 (230.4 kbps) | ||||
| Data length | PD size: 2 bytes, OD size: 1 byte (M-sequence type: TYPE_2_2) | ||||
| Minimum cycle
time |
COM2: 2.3 ms, COM3: 0.4 ms | ||||
| Accessories | Instruction manual, Clamping nuts, Toothed washer | ||||
*1. The response frequency is an average value. Measurement conditions are as follows: standard sensing object, a
distance of twice the standard sensing object, and a set distance of half the sensing distance.
*2. IO-Link is not supported for NC-type PNP outputs or all types of NPN outputs.
*3. Dual-output specification for the M8-size models is only applicable to long-size M12 Connector models.
*4. The Oil-resistant Component Evaluation Standards are OMRON's own durability evaluation standards. 2-year oil
resistance indicates the median value of the product design and the oil-resistance performance criterion result (=Typical
value). Actual performance can be expected to decline after two years on average from shipment. The Pre-wired
Connector Model verifies 2 years of oil resistance when mating with Round Oil-resistant Connectors XS5 NEXT series
correctly. The degree of protection is not satisfied with the part where cable wires are uncovered for the Pre-wired
Models.
*5. Weight of the standard body-sized model.
distance of twice the standard sensing object, and a set distance of half the sensing distance.
*2. IO-Link is not supported for NC-type PNP outputs or all types of NPN outputs.
*3. Dual-output specification for the M8-size models is only applicable to long-size M12 Connector models.
*4. The Oil-resistant Component Evaluation Standards are OMRON's own durability evaluation standards. 2-year oil
resistance indicates the median value of the product design and the oil-resistance performance criterion result (=Typical
value). Actual performance can be expected to decline after two years on average from shipment. The Pre-wired
Connector Model verifies 2 years of oil resistance when mating with Round Oil-resistant Connectors XS5 NEXT series
correctly. The degree of protection is not satisfied with the part where cable wires are uncovered for the Pre-wired
Models.
*5. Weight of the standard body-sized model.
DC 2-wire (Triple distance model)
DC 2-wire (Triple distance model)
| Size | M8 | M12 | |||
|---|---|---|---|---|---|
| Shielded | Shielded | Unshielded | Shielded | Unshielded | |
| Model | E2E-X3D[] | E2E-X6MD[] | E2E-X7D[] | E2E-X10MD[] | |
| Sensing distance | 3 mm ±10% | 6 mm ±10% | 7 mm ±10% | 10 mm ±10% | |
| Setting distance *1 | 0 to 2.4 mm | 0 to 4.8 mm | 0 to 5.6 mm | 0 to 8 mm | |
| Differential travel | 15% max. of sensing distance | ||||
| Detectable object | Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to
Engineering Data on Catalog.) |
||||
| Standard sensing object | Iron,
9 × 9 × 1 mm |
Iron,
18 × 18 × 1 mm |
Iron,
21 × 21 × 1 mm |
Iron,
30 × 30 × 1 mm |
|
| Response frequency *2 | 350 Hz | 250 Hz | 350 Hz | 200 Hz | |
| Power supply voltage | 10 to 30 VDC, (including 10% ripple (p-p)) | ||||
| Leakage current | 0.8 mA max. | ||||
| Control
output |
Load current | 3 to 100 mA | |||
| Residual
voltage |
Polarity: 3 V max. (Load current: 100 mA, Cable length: 2 m)
No polarity: 5 V max. (Load current: 100 mA, Cable length: 2 m) |
||||
| Indicator | D1 Models: Operation indicator (orange), Setting indicator (green)
D2 Models: Operation indicator (orange) |
||||
| Operation mode | D1 Models: NO
D2 Models: NC Refer to the timing charts under I/O Circuit Diagrams on Catalog for details. |
||||
| Protection circuits | Surge suppressor, Load short-circuit protection | ||||
| Ambient temperature
range |
Operating: -25 to 70°C, Storage: -40 to 85°C (with no icing or condensation) | ||||
| Ambient humidity range | Operating and Storage: 35% to 95% (with no condensation) | ||||
| Temperature influence | ±10% max. of sensing distance at 23°C in the temperature range of -25 to 70°C | ||||
| Voltage influence | ±1% max. of sensing distance at rated voltage in the rated voltage ±15% range | ||||
| Insulation resistance | 50 MΩ min. (at 500 VDC) between current-carrying parts and case | ||||
| Dielectric strength | 1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case | ||||
| Vibration resistance
(destruction) |
10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions | ||||
| Shock resistance
(destruction) |
500 m/s2 10 times each in X, Y, and Z
directions |
1,000 m/s2 10 times each in X, Y, and Z
directions |
|||
| Degree of protection | Pre-wired Models/Pre-wired Connector Models: IP67 (IEC 60529), IP67G *3 (JIS C 0920
Annex 1) Passed OMRON's Oil-resistant Component Evaluation Standards *4 (Cutting oil type: specified in JIS K 2241:2000, Temperature: 35 °C max.) and ISO 20653 (old standard: DIN 40050 PART9) IP69K |
||||
| Connecting method | Pre-wired Models (Standard cable length: 2 m) and Pre-wired Connector Models (Standard
cable length: 0.3 m) |
||||
| Weight
(packed state) |
Pre-wired
Models |
Approx. 60 g | Approx. 70 g | ||
| Pre-wired
Connector Models |
Approx. 30 g | Approx. 40 g | |||
| Materials | Case | Nickel-plated brass | Stainless steel
(SUS303) |
Nickel-plated brass | |
| Sensing
surface |
Polybutylene terephthalate (PBT) | ||||
| Clamping
nuts |
Nickel-plated brass | ||||
| Toothed
washer |
Zinc-plated iron | ||||
| Cable | Vinyl chloride (PVC) | ||||
| Accessories | Instruction manual, Clamping nuts, Toothed washer | ||||
| Size | M18 | M30 | |||
|---|---|---|---|---|---|
| Shielded | Shielded | Unshielded | Shielded | Unshielded | |
| Model | E2E-X11D[] | E2E-X20MD[] | E2E-X20D[] | E2E-X40MD[] | |
| Sensing distance | 11 mm ±10% | 20 mm ±10% | 20 mm ±10% | 40 mm ±10% | |
| Setting distance *1 | 0 to 8.8 mm | 0 to 16 mm | 0 to 16 mm | 0 to 32 mm | |
| Differential travel | 15% max. of sensing distance | ||||
| Detectable object | Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to
Engineering Data on Catalog.) |
||||
| Standard sensing object | Iron,
33 × 33 × 1 mm |
Iron,
60 × 60 × 1 mm |
Iron,
60 × 60 × 1 mm |
Iron,
120 × 120 × 1 mm |
|
| Response frequency *2 | 250 Hz | 200 Hz | 200 Hz | 50 Hz | |
| Power supply voltage | 10 to 30 VDC, (including 10% ripple (p-p)) | ||||
| Leakage current | 0.8 mA max. | ||||
| Control
output |
Load current | 3 to 100 mA | |||
| Residual
voltage |
Polarity: 3 V max. (Load current: 100 mA, Cable length: 2 m)
No polarity: 5 V max. (Load current: 100 mA, Cable length: 2 m) |
||||
| Indicator | D1 Models: Operation indicator (orange), Setting indicator (green)
D2 Models: Operation indicator (orange) |
||||
| Operation mode | D1 Models: NO
D2 Models: NC Refer to the timing charts under I/O Circuit Diagrams on Catalog for details. |
||||
| Protection circuits | Surge suppressor, Load short-circuit protection | ||||
| Ambient temperature
range |
Operating: -25 to 70°C, Storage: -40 to 85°C (with no icing or condensation) | ||||
| Ambient humidity range | Operating and Storage: 35% to 95% (with no condensation) | ||||
| Temperature influence | ±20% max. of sensing
distance at 23°C in the temperature range of -25 to 70°C |
±10% max. of sensing
distance at 23°C in the temperature range of -25 to 70°C |
±20% max. of sensing distance at 23°C in
the temperature range of -25 to 70°C |
||
| Voltage influence | ±1% max. of sensing distance at rated voltage in the rated voltage ±15% range | ||||
| Insulation resistance | 50 MΩ min. (at 500 VDC) between current-carrying parts and case | ||||
| Dielectric strength | 1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case | ||||
| Vibration resistance
(destruction) |
10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions | ||||
| Shock resistance
(destruction) |
1,000 m/s2 10 times each in X, Y, and Z directions | ||||
| Degree of protection | Pre-wired Models/Pre-wired Connector Models: IP67 (IEC 60529), IP67G *3 (JIS C 0920
Annex 1) Passed OMRON's Oil-resistant Component Evaluation Standards *4 (Cutting oil type: specified in JIS K 2241:2000, Temperature: 35 °C max.) and ISO 20653 (old standard: DIN 40050 PART9) IP69K |
||||
| Connecting method | Pre-wired Models (Standard cable length: 2 m) and Pre-wired Connector Models (Standard
cable length: 0.3 m) |
||||
| Weight
(packed state) |
Pre-wired
Models |
Approx. 130 g | Approx. 150 g | Approx. 180 g | Approx. 210 g |
| Pre-wired
Connector Models |
Approx. 70 g | Approx. 90 g | Approx.110 g | Approx. 140 g | |
| Materials | Case | Nickel-plated brass | |||
| Sensing
surface |
Polybutylene terephthalate (PBT) | ||||
| Clamping
nuts |
Nickel-plated brass | ||||
| Toothed
washer |
Zinc-plated iron | ||||
| Cable | Vinyl chloride (PVC) | ||||
| Accessories | Instruction manual, Clamping nuts, Toothed washer | ||||
*1. Use the Sensor within the range in which the setting indicator (green LED) is ON (except D2 Models).
*2. The response frequency is an average value. Measurement conditions are as follows: standard sensing object, a
distance of twice the standard sensing object, and a set distance of half the sensing distance.
*3. The IP67G is the degree of protection which is defined according to the JIS (Japanese Industrial Standards).
The IP67 indicates the same level of protection as defined by the IEC, and the G indicates that a device has resistance
to oil.
*4. The Oil-resistant Component Evaluation Standards are OMRON's own durability evaluation standards.
2-year oil resistance indicates the median value of the product design and the oil-resistance performance criterion result
(=Typical value).
The Pre-wired Connector Model verifies 2 years of oil resistance when mating with Round Oil-resistant Connectors XS5
NEXT series correctly.
The degree of protection is not satisfied with the part where cable wires are uncovered for the Pre-wired Models.
*2. The response frequency is an average value. Measurement conditions are as follows: standard sensing object, a
distance of twice the standard sensing object, and a set distance of half the sensing distance.
*3. The IP67G is the degree of protection which is defined according to the JIS (Japanese Industrial Standards).
The IP67 indicates the same level of protection as defined by the IEC, and the G indicates that a device has resistance
to oil.
*4. The Oil-resistant Component Evaluation Standards are OMRON's own durability evaluation standards.
2-year oil resistance indicates the median value of the product design and the oil-resistance performance criterion result
(=Typical value).
The Pre-wired Connector Model verifies 2 years of oil resistance when mating with Round Oil-resistant Connectors XS5
NEXT series correctly.
The degree of protection is not satisfied with the part where cable wires are uncovered for the Pre-wired Models.
DC 2-wire (Standard/ Double/ Single distance model)
DC 2-wire (Standard model)
| Size | M8 | M12 | |||
|---|---|---|---|---|---|
| Shielded | Shielded | Unshielded | Shielded | Unshielded | |
| Item Model | E2E-X2D[] | E2E-X4MD[] | E2E-X3D[] | E2E-X8MD[] | |
| Sensing distance | 2 mm ±10% | 4 mm ±10% | 3 mm ±10% | 8 mm ±10% | |
| Setting distance *1 | 0 to 1.6 mm | 0 to 3.2 mm | 0 to 2.4 mm | 0 to 6.4 mm | |
| Differential travel | 15% max. of sensing distance | 10% max. of sensing distance | |||
| Detectable object | Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to
Engineering Data on Catalog.) |
||||
| Standard sensing object | Iron,
8 × 8 × 1 mm |
Iron,
20 × 20 × 1 mm |
Iron,
12 × 12 × 1 mm |
Iron,
30 × 30 × 1 mm |
|
| Response frequency *2 | 1.5 kHz | 1 kHz | 1 kHz | 0.8 kHz | |
| Power supply voltage | 12 to 24 VDC (including 10% ripple (p-p)), Class 2 | ||||
| Leakage current | 0.8 mA max. | ||||
| Control
output |
Load current | 3 to 100 mA | |||
| Residual
voltage |
Polarity: 3 V max. (Load current: 100 mA, Cable length: 2 m)
No polarity: 5 V max. (Load current: 100 mA, Cable length: 2 m) |
||||
| Indicator | D1 Models: Operation indicator (orange), Setting indicator (green)
D2 Models: Operation indicator (orange) |
||||
| Operation mode | D1 Models: NO
D2 Models: NC Refer to the timing charts under I/O Circuit Diagrams on Catalog for details. |
||||
| Protection circuits | Surge suppressor, Load short-circuit protection | ||||
| Ambient temperature range | Operating: -25 to 70°C, Storage: -40 to 85°C (with no icing or condensation) | ||||
| Ambient humidity range | Operating and Storage: 35% to 95% (with no condensation) | ||||
| Temperature influence | ±10% max. of sensing distance at 23°C in the temperature range of -25 to 70°C | ||||
| Voltage influence | ±1% max. of sensing distance at rated voltage in the rated voltage ±15% range | ||||
| Insulation resistance | 50 MΩ min. (at 500 VDC) between current-carrying parts and case | ||||
| Dielectric strength | 1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case | ||||
| Vibration resistance
(destruction) |
10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions | ||||
| Shock resistance
(destruction) |
500 m/s2 10 times each in X, Y, and Z
directions |
1,000 m/s2 10 times each in X, Y, and Z
directions |
|||
| Degree of protection | Pre-wired Models/Pre-wired Connector Models:
IP67 (IEC 60529), IP67G *3 (JIS C 0920 Annex 1) Passed OMRON's Oil-resistant Component Evaluation Standards *4 (Cutting oil type: specified in JIS K 2241:2000, Temperature: 35°C max.) and ISO 20653 (old standard: DIN 40050 PART9) IP69K |
||||
| Connecting method | Pre-wired Models (Standard cable length: 2 m), Pre-wired Connector Models (Standard
cable length: 0.3 m), M8 Connector Models and M12 Connector Models |
||||
| Weight *5
(packed state) |
Pre-wired Models | Approx. 60 g | Approx. 70 g | ||
| Pre-wired
Connector Models |
Approx. 30 g | Approx. 40 g | |||
| Connector Models | Approx. 40 g (M8/M12 Connector) | Approx. 55 g | |||
| Materials | Case | M8 Size: Stainless steel (SUS303), M12/M18/M30 Size: Nickel-plated brass | |||
| Sensing surface | Polybutylene terephthalate (PBT) | ||||
| Clamping nuts | Nickel-plated brass | ||||
| Toothed washer | Zinc-plated iron | ||||
| Cable | Vinyl chloride (PVC)
Note: Material of Pre-wired Models and Pre-wired Connector Models. |
||||
| Accessories | Instruction manual, Clamping nuts, Toothed washer | ||||
| Size | M18 | M30 | |||
|---|---|---|---|---|---|
| Shielded | Shielded | Unshielded | Shielded | Unshielded | |
| Item Model | E2E-X7D[] | E2E-X14MD[] | E2E-X10D[] | E2E-X20MD[] | |
| Sensing distance | 7 mm ±10% | 14 mm ±10% | 10 mm ±10% | 20 mm ±10% | |
| Setting distance *1 | 0 to 5.6 mm | 0 to 11.2 mm | 0 to 8 mm | 0 to 16 mm | |
| Differential travel | 15% max. of sensing distance | 10% max. of sensing distance | |||
| Detectable object | Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to
Engineering Data on Catalog.) |
||||
| Standard sensing object | Iron,
18 × 18 × 1 mm |
Iron,
30 × 30 × 1 mm |
Iron,
30 × 30 × 1 mm |
Iron,
54 × 54 × 1 mm |
|
| Response frequency *2 | 0.5 kHz | 0.4 kHz | 0.4 kHz | 0.1 kHz | |
| Power supply voltage | 12 to 24 VDC (including 10% ripple (p-p)), Class 2 | ||||
| Leakage current | 0.8 mA max. | ||||
| Control
output |
Load current | 3 to 100 mA | |||
| Residual
voltage |
Polarity: 3 V max. (Load current: 100 mA, Cable length: 2 m)
No polarity: 5 V max. (Load current: 100 mA, Cable length: 2 m) |
||||
| Indicator | D1 Models: Operation indicator (orange), Setting indicator (green)
D2 Models: Operation indicator (orange) |
||||
| Operation mode | D1 Models: NO
D2 Models: NC Refer to the timing charts under I/O Circuit Diagrams on Catalog for details. |
||||
| Protection circuits | Surge suppressor, Load short-circuit protection | ||||
| Ambient temperature range | Operating: -25 to 70°C, Storage: -40 to 85°C (with no icing or condensation) | ||||
| Ambient humidity range | Operating and Storage: 35% to 95% (with no condensation) | ||||
| Temperature influence | ±10% max. of sensing distance at 23°C in the temperature range of -25 to 70°C | ||||
| Voltage influence | ±1% max. of sensing distance at rated voltage in the rated voltage ±15% range | ||||
| Insulation resistance | 50 MΩ min. (at 500 VDC) between current-carrying parts and case | ||||
| Dielectric strength | 1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case | ||||
| Vibration resistance
(destruction) |
10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions | ||||
| Shock resistance
(destruction) |
1,000 m/s2 10 times each in X, Y, and Z directions | ||||
| Degree of protection | Pre-wired Models/Pre-wired Connector Models:
IP67 (IEC 60529), IP67G *3 (JIS C 0920 Annex 1) Passed OMRON's Oil-resistant Component Evaluation Standards *4 (Cutting oil type: specified in JIS K 2241:2000, Temperature: 35°C max.) and ISO 20653 (old standard: DIN 40050 PART9) IP69K |
||||
| Connecting method | Pre-wired Models (Standard cable length: 2 m), Pre-wired Connector Models (Standard
cable length: 0.3 m), M8 Connector Models and M12 Connector Models |
||||
| Weight *5
(packed state) |
Pre-wired Models | Approx. 130 g | Approx. 150 g | Approx. 180 g | Approx. 210 g |
| Pre-wired
Connector Models |
Approx. 70 g | Approx. 90 g | Approx. 110 g | Approx. 140 g | |
| Connector Models | Approx. 85 g | Approx. 80 g | Approx. 160 g | Approx. 150 g | |
| Materials | Case | M8 Size: Stainless steel (SUS303), M12/M18/M30 Size: Nickel-plated brass | |||
| Sensing surface | Polybutylene terephthalate (PBT) | ||||
| Clamping nuts | Nickel-plated brass | ||||
| Toothed washer | Zinc-plated iron | ||||
| Cable | Vinyl chloride (PVC)
Note: Material of Pre-wired Models and Pre-wired Connector Models. |
||||
| Accessories | Instruction manual, Clamping nuts, Toothed washer | ||||
*1. Use the Sensor within the range in which the setting indicator (green LED) is ON (except D2 Models).
*2. The response frequency is an average value. Measurement conditions are as follows: standard sensing object, a
distance of twice the standard.
*3. The IP67G is the degree of protection which is defined according to the JIS (Japanese Industrial Standards).
The IP67 indicates the same level of protection as defined by the IEC, and the G indicates that a device has resistance
to oil.
*4. The Oil-resistant Component Evaluation Standards are OMRON's own durability evaluation standards.
2-year oil resistance indicates the median value of the product design and the oil-resistance performance criterion result
(=Typical value).
The Pre-wired Connector Model verifies 2 years of oil resistance when mating with Round Oil-resistant Connectors XS5
NEXT series correctly.
The degree of protection is not satisfied with the part where cable wires are uncovered for the Pre-wired Models.
*5. Weight of the standard body-sized model.
*2. The response frequency is an average value. Measurement conditions are as follows: standard sensing object, a
distance of twice the standard.
*3. The IP67G is the degree of protection which is defined according to the JIS (Japanese Industrial Standards).
The IP67 indicates the same level of protection as defined by the IEC, and the G indicates that a device has resistance
to oil.
*4. The Oil-resistant Component Evaluation Standards are OMRON's own durability evaluation standards.
2-year oil resistance indicates the median value of the product design and the oil-resistance performance criterion result
(=Typical value).
The Pre-wired Connector Model verifies 2 years of oil resistance when mating with Round Oil-resistant Connectors XS5
NEXT series correctly.
The degree of protection is not satisfied with the part where cable wires are uncovered for the Pre-wired Models.
*5. Weight of the standard body-sized model.
DC 2-wire (Double distance model)
| Size | M12 | M18 | M30 | |||
|---|---|---|---|---|---|---|
| Shielded | Shielded | Unshielded | Shielded | Shielded | Unshielded | |
| Item Model | E2E-X4D[] | E2E-X8D[] | E2E-X16MD[] | E2E-X15D[] | E2E-X30MD[] | |
| Sensing distance | 4 mm ±10% | 8 mm ±10% | 16 mm ±10% | 15 mm ±10% | 30 mm ±10% | |
| Setting distance *1 | 0 to 3.2 mm | 0 to 6.4 mm | 0 to 12.8 mm | 0 to 12 mm | 0 to 24 mm | |
| Differential travel | 15% max. of sensing distance | |||||
| Detectable object | Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to
Engineering Data on Catalog.) |
|||||
| Standard sensing object | Iron,
12 × 12 × 1 mm |
Iron,
18 × 18 × 1 mm |
Iron,
45 × 45 × 1 mm |
Iron,
30 × 30 × 1 mm |
Iron,
70 × 70 × 1 mm |
|
| Response frequency *2 | 1 kHz | 0.5 kHz | 0.4 kHz | 0.25 kHz | 0.1 kHz | |
| Power supply voltage | 12 to 24 VDC (including 10% ripple (p-p)), Class 2 | |||||
| Leakage current | 0.8 mA max. | |||||
| Control
output |
Load current | 3 to 100 mA | ||||
| Residual
voltage |
5 V max. (Load current: 100 mA, Cable length: 2 m) | |||||
| Indicator | D1 Models: Operation indicator (orange), Setting indicator (green)
D2 Models: Operation indicator (orange) |
|||||
| Operation mode | D1 Models: NO
D2 Models: NC Refer to the timing charts under I/O Circuit Diagrams on Catalog for details. |
|||||
| Protection circuits | Surge suppressor, Load short-circuit protection | |||||
| Ambient temperature
range |
Operating: -25 to 70°C, Storage: -40 to 85°C (with no icing or condensation) | |||||
| Ambient humidity range | Operating and Storage: 35% to 95% (with no condensation) | |||||
| Temperature influence | ±10% max. of sensing distance at 23°C in the temperature range of -25 to 70°C | |||||
| Voltage influence | ±1% max. of sensing distance at rated voltage in the rated voltage ±15% range | |||||
| Insulation resistance | 50 MΩ min. (at 500 VDC) between current-carrying parts and case | |||||
| Dielectric strength | 1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case | |||||
| Vibration resistance
(destruction) |
10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions | |||||
| Shock resistance
(destruction) |
500 m/s2 10 times
each in X, Y, and Z directions |
1,000 m/s2 10 times each in X, Y, and Z directions | ||||
| Degree of protection | Pre-wired Models/Pre-wired Connector Models:
IP67 (IEC 60529), IP67G *3 (JIS C 0920 Annex 1) Passed OMRON's Oil-resistant Component Evaluation Standards *4 (Cutting oil type: specified in JIS K 2241:2000, Temperature: 35°C max.) and ISO 20653 (old standard: DIN 40050 PART9) IP69K |
|||||
| Connecting method | Pre-wired Models (Standard cable length: 2 m), Pre-wired Connector Models (Standard
cable length: 0.3 m) |
|||||
| Weight
(packed state) |
Pre-wired
Models |
Approx. 70 g | Approx. 130 g | Approx. 150 g | Approx. 180 g | Approx. 210 g |
| Pre-wired
Connector Models |
Approx. 40 g | Approx. 70 g | Approx. 90 g | Approx. 110 g | Approx. 140 g | |
| Materials | Case | Nickel-plated brass | ||||
| Sensing surface | Polybutylene terephthalate (PBT) | |||||
| Clamping nuts | Nickel-plated brass | |||||
| Toothed washer | Zinc-plated iron | |||||
| Cable | Vinyl chloride (PVC) | |||||
| Accessories | Instruction manual, Clamping nuts, Toothed washer | |||||
*1. Use the Sensor within the range in which the setting indicator (green LED) is ON (except D2 Models).
*2. The response frequency is an average value. Measurement conditions are as follows: standard sensing object, a
distance of twice the standard.
*3. The IP67G is the degree of protection which is defined according to the JIS (Japanese Industrial Standards).
The IP67 indicates the same level of protection as defined by the IEC, and the G indicates that a device has resistance
to oil.
*4. The Oil-resistant Component Evaluation Standards are OMRON's own durability evaluation standards.
2-year oil resistance indicates the median value of the product design and the oil-resistance performance criterion result
(=Typical value).
The Pre-wired Connector Model verifies 2 years of oil resistance when mating with Round Oil-resistant Connectors XS5
NEXT series correctly.
The degree of protection is not satisfied with the part where cable wires are uncovered for the Pre-wired Models.
*2. The response frequency is an average value. Measurement conditions are as follows: standard sensing object, a
distance of twice the standard.
*3. The IP67G is the degree of protection which is defined according to the JIS (Japanese Industrial Standards).
The IP67 indicates the same level of protection as defined by the IEC, and the G indicates that a device has resistance
to oil.
*4. The Oil-resistant Component Evaluation Standards are OMRON's own durability evaluation standards.
2-year oil resistance indicates the median value of the product design and the oil-resistance performance criterion result
(=Typical value).
The Pre-wired Connector Model verifies 2 years of oil resistance when mating with Round Oil-resistant Connectors XS5
NEXT series correctly.
The degree of protection is not satisfied with the part where cable wires are uncovered for the Pre-wired Models.
DC 2-wire (Single distance model)
| Size | M8 | M12 | M18 | |
|---|---|---|---|---|
| Shielded | Shielded | |||
| Model | E2E-X1R5D[] | E2E-X2R5D[] | E2E-X5D[] | |
| Sensing distance | 1.5 mm ±10% | 2.5 mm ±10% | 5 mm ±10% | |
| Setting distance *1 | 0 to 1.2 mm | 0 to 2 mm | 0 to 4 mm | |
| Differential travel | 10% max. of sensing distance | |||
| Detectable object | Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to
Engineering Data on Catalog.) |
|||
| Standard sensing object | Iron, 10 × 10 × 1 mm | Iron, 12 × 12 × 1 mm | Iron, 18 × 18 × 1 mm | |
| Response frequency *2 | 250 Hz | 250 Hz | 250 Hz | |
| Power supply voltage | 10 to 30 VDC, (including 10% ripple (p-p)) | |||
| Leakage current | 0.8 mA max. | |||
| Control
output |
Load current | 3 to 100 mA | ||
| Residual
voltage |
Polarity: 3 V max. (Load current: 100 mA, Cable length: 2 m)
No polarity: 5 V max. (Load current: 100 mA, Cable length: 2 m) |
|||
| Indicator | D1 Models: Operation indicator (orange), Setting indicator (green)
D2 Models: Operation indicator (orange) |
|||
| Operation mode | D1 Models: NO
D2 Models: NC Refer to the timing charts under I/O Circuit Diagrams on Catalog for details. |
|||
| Protection circuits | Surge suppressor, Load short-circuit protection | |||
| Ambient temperature
range |
Operating: -25 to 70°C, Storage: -40 to 85°C (with no icing or condensation) | |||
| Ambient humidity range | Operating and Storage: 35% to 95% (with no condensation) | |||
| Temperature influence | ±10% max. of sensing distance at 23°C in the temperature range of -25 to 70°C | |||
| Voltage influence | ±1% max. of sensing distance at rated voltage in the rated voltage ±15% range | |||
| Insulation resistance | 50 MΩ min. (at 500 VDC) between current-carrying parts and case | |||
| Dielectric strength | 1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case | |||
| Vibration resistance
(destruction) |
10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions | |||
| Shock resistance
(destruction) |
500 m/s2 10 times each in X,
Y, and Z directions |
1,000 m/s2 10 times each in X, Y, and Z directions | ||
| Degree of protection | Pre-wired Models/Pre-wired Connector Models: IP67 (IEC 60529), IP67G *3 (JIS C 0920
Annex 1) Passed OMRON's Oil-resistant Component Evaluation Standards *4 (Cutting oil type: specified in JIS K 2241:2000, Temperature: 35°C max.) and ISO 20653 (old standard: DIN 40050 PART9) IP69K |
|||
| Connecting method | Pre-wired Models (Standard cable length: 2 m) and Pre-wired Connector Models (Standard
cable length: 0.3 m) |
|||
| Weight
(packed state) |
Pre-wired
Models |
Approx. 60 g | Approx. 70 g | Approx. 130 g |
| Pre-wired
Connector Models |
Approx. 30 g | Approx. 40 g | Approx. 70 g | |
| Materials | Case | Stainless steel (SUS303) | Nickel-plated brass | |
| Sensing
surface |
Polybutylene terephthalate (PBT) | |||
| Clamping
nuts |
Nickel-plated brass | |||
| Toothed
washer |
Zinc-plated iron | |||
| Cable | Vinyl chloride (PVC) | |||
| Accessories | Instruction manual, Clamping nuts, Toothed washer | |||
*1. Use the Sensor within the range in which the setting indicator (green LED) is ON (except D2 Models).
*2. The response frequency is an average value. Measurement conditions are as follows: standard sensing object, a
distance of twice the standard.
*3. The IP67G is the degree of protection which is defined according to the JIS (Japanese Industrial Standards).
The IP67 indicates the same level of protection as defined by the IEC, and the G indicates that a device has resistance
to oil.
*4. The Oil-resistant Component Evaluation Standards are OMRON's own durability evaluation standards.
2-year oil resistance indicates the median value of the product design and the oil-resistance performance criterion result
(=Typical value).
The Pre-wired Connector Model verifies 2 years of oil resistance when mating with Round Oil-resistant Connectors XS5
NEXT series correctly.
The degree of protection is not satisfied with the part where cable wires are uncovered for the Pre-wired Models.
*2. The response frequency is an average value. Measurement conditions are as follows: standard sensing object, a
distance of twice the standard.
*3. The IP67G is the degree of protection which is defined according to the JIS (Japanese Industrial Standards).
The IP67 indicates the same level of protection as defined by the IEC, and the G indicates that a device has resistance
to oil.
*4. The Oil-resistant Component Evaluation Standards are OMRON's own durability evaluation standards.
2-year oil resistance indicates the median value of the product design and the oil-resistance performance criterion result
(=Typical value).
The Pre-wired Connector Model verifies 2 years of oil resistance when mating with Round Oil-resistant Connectors XS5
NEXT series correctly.
The degree of protection is not satisfied with the part where cable wires are uncovered for the Pre-wired Models.
last update: October 2, 2023
Top of page
Products
Menu
About Us
Menu
Solutions
Menu
Privacy
Menu
Services
Menu
Resources
Menu
© Copyright OMRON Corporation 2000-2020. All Rights Reserved.