Menu
Industrial Automation
E3ZM
Compact Photoelectric Sensor with Stainless Steel Housing
Stainless Steel Housing Ideal for Food Industry (PAT Pending)
Related Contents
Application Solutions
last update: April 9, 2015
Sensors
| Sensing
method |
Appearance | Connection
method |
Sensing
distance |
Model | |
|---|---|---|---|---|---|
| NPN output | PNP output | ||||
| Through-
beam (Emitter + Receiver) |
 |
Pre-wired (2 m) | 15 m
(Infrared light) |
E3ZM-T61 2M
Emitter E3ZM-T61-L 2M Receiver E3ZM-T61-D 2M |
E3ZM-T81 2M
Emitter E3ZM-T81-L 2M Receiver E3ZM-T81-D 2M |
| Connector
(M8, 4 pins) |
E3ZM-T66
Emitter E3ZM-T66-L Receiver E3ZM-T66-D |
E3ZM-T86
Emitter E3ZM-T86-L Receiver E3ZM-T86-D |
|||
| Pre-wired (2 m) | 0.8 m
(apertures built in) (Infrared light) |
E3ZM-T63 2M
Emitter E3ZM-T63-L 2M Receiver E3ZM-T63-D 2M |
E3ZM-T83 2M
Emitter E3ZM-T83-L 2M Receiver E3ZM-T83-D 2M |
||
| Connector
(M8, 4 pins) |
E3ZM-T68
Emitter E3ZM-T68-L Receiver E3ZM-T68-D |
E3ZM-T88
Emitter E3ZM-T88-L Receiver E3ZM-T88-D |
|||
| Retro-
reflective with MSR function |
 |
Pre-wired (2 m) | 4 m (100 mm)
*2 (Using E39-R1S) (Red light) |
E3ZM-R61 2M | E3ZM-R81 2M |
| Connector
(M8, 4 pins) |
E3ZM-R66 | E3ZM-R86 | |||
| Diffuse-
reflective |
 |
Pre-wired (2 m) | 1 m
(Infrared light) |
E3ZM-D62 2M | E3ZM-D82 2M |
| Connector
(M8, 4 pins) |
E3ZM-D67 | E3ZM-D87 | |||
| BGS
reflective (fixed distance) |
 |
Pre-wired (2 m) | 10 to 100 mm
(Red light) |
E3ZM-LS61H 2M | E3ZM-LS81H 2M |
| Connector
(M8, 4 pins) |
E3ZM-LS66H | E3ZM-LS86H | |||
| Pre-wired (2 m) | 10 to 150 mm
(Red light) |
E3ZM-LS62H 2M | E3ZM-LS82H 2M | ||
| Connector
(M8, 4 pins) |
E3ZM-LS67H | E3ZM-LS87H | |||
| Pre-wired (2 m) | 10 to 200 mm
(Red light) |
E3ZM-LS64H 2M | E3ZM-LS84H 2M | ||
| Connector
(M8, 4 pins) |
E3ZM-LS69H | E3ZM-LS89H | |||
*1. The Reflector is sold separately. Select the Reflector model most suited to the application.
*2. Values in parentheses indicate the minimum required distance between the Sensor and Reflector.
*2. Values in parentheses indicate the minimum required distance between the Sensor and Reflector.
Accessories (Order Separately)
Reflectors
(A Reflector is required for each Retro-reflective Sensor: A Reflector is not provided with the Sensor. Be sure to order a Reflector.)
| Name | E3ZM-R
Sensing distance * |
Model | Quantity | Remarks | |
|---|---|---|---|---|---|
| Rated value | Reference value | ||||
| Reflector | 3 m (100 mm) | --- | E39-R1 | 1 | Reflectors are not provided
with Retro-reflective models. •The MSR function is enabled. |
| 4 m (100 mm) | --- | E39-R1S | 1 | ||
| --- | 5 m (100 mm) | E39-R2 | 1 | ||
| --- | 2.5 m (100 mm) | E39-R9 | 1 | ||
| --- | 3.5 m (100 mm) | E39-R10 | 1 | ||
| Fog Preventive Coating | --- | 3 m (100 mm) | E39-R1K | 1 | |
| Small Reflector | --- | 1.5 m (50 mm) | E39-R3 | 1 | |
| Tape Reflector | --- | 700 mm (150 mm) | E39-RS1 | 1 | |
| --- | 1.1 m (150 mm) | E39-RS2 | 1 | ||
| --- | 1.4 m (150 mm) | E39-RS3 | 1 | ||
Note: If you use the Reflector at any distance other than the rated distance, make sure that the stability indicator lights
properly when you install the Sensor.
* Values in parentheses indicate the minimum required distance between the Sensor and Reflector.
properly when you install the Sensor.
* Values in parentheses indicate the minimum required distance between the Sensor and Reflector.
Mounting Brackets
A Mounting Bracket is not enclosed with the Sensor. Order a Mounting Bracket separately if required.
| Appearance | Model
(Material) |
Quantity | Remarks |
|---|---|---|---|
 |
E39-L153
(SUS304) *1 |
1 | Mounting Brackets |
 |
E39-L104
(SUS304) *1 |
1 | |
 |
E39-L43
(SUS304) *2 |
1 | Horizontal Mounting Bracket |
 |
E39-L142
(SUS304) *2 |
1 | Horizontal Protective Cover Bracket |
 |
E39-L44
(SUS304) |
1 | Rear Mounting Bracket |
 |
E39-L98
(SUS304) *2 |
1 | Metal Protective Cover Bracket |
 |
E39-L150
(SUS304) |
1 set | (Sensor adjuster)
Easily mounted to the aluminum frame rails of conveyors and easily adjusted. For left to right adjustment |
 |
E39-L151
(SUS304) |
1 set | |
 |
E39-L144
(SUS304) *2 |
1 | Compact Protective Cover Bracket |
Note: When using a Through-beam Sensor, order one Mounting Bracket for the Receiver and one for the Emitter.
*1. Cannot be used for Standard Connector models with mounting surface on the bottom. In that case, use Pre-wired
Connector models.
*2. Cannot be used for Standard Connector models.
*1. Cannot be used for Standard Connector models with mounting surface on the bottom. In that case, use Pre-wired
Connector models.
*2. Cannot be used for Standard Connector models.
Sensor I/O Connectors (Sockets on One Cable End)
(Models for Connectors: A Connector is not provided with the Sensor. Be sure to order a Connector separately.)
| Size | Cable | Appearance | Cable type | Model | ||
|---|---|---|---|---|---|---|
| M8 (4 pins) *1 | Standard | Straight *2 |
 |
2 m | 4-wire | XS3F-M421-402-A |
| 5 m | XS3F-M421-405-A | |||||
| L-shaped *2 *3 |
 |
2 m | XS3F-M422-402-A | |||
| 5 m | XS3F-M422-405-A | |||||
Note: When using a Through-beam Sensor, order one Mounting Bracket for the Receiver and one for the Emitter.
*1. Cable specifications: Outer coating material: PVC, Nut material: Stainless steel, Degree of protection: IP67 (IEC
60529)
*2. The connector will not rotate after connecting.
*3. The cable is fixed at an angle of 180° from the sensor emitter/receiver surface.
*1. Cable specifications: Outer coating material: PVC, Nut material: Stainless steel, Degree of protection: IP67 (IEC
60529)
*2. The connector will not rotate after connecting.
*3. The cable is fixed at an angle of 180° from the sensor emitter/receiver surface.
last update: April 9, 2015
Top of page
Products
Menu
About Us
Menu
Solutions
Menu
Privacy
Menu
Services
Menu
Resources
Menu
© Copyright OMRON Corporation 2000-2020. All Rights Reserved.