Industrial Automation

EE-SY671 / 672

Reflective Photomicrosensor with Sensitivity Adjuster (Non-modulated)

EE-SY671 / 672

Photomicrosensor with sensitivity adjuster.

last update: January 5, 2017

Sensors

Appearance		Sensing method	Sensing distance	Output type	Output configuration	Model
Horizontal type		Reflective type	1 to 5 mm (Infrared light)	NPN output	Dark-ON or Light-ON (Selectable) *	EE-SY671
Vertical type		Reflective type	1 to 5 mm (Infrared light)	NPN output	Dark-ON or Light-ON (Selectable) *	EE-SY672

* The Dark-ON/Light-ON (selectable) models are normally used as dark-ON models. To use them as light-ON models,
short-circuit the L terminal and positive (+) terminal.
An EE-1001-1 Connector with the terminals already short-circuited is also available.

Accessories (Order Separately)

Type		Cable length	Model	Remarks
Connector	Connector		EE-1001
			EE-1001-1	L terminal and positive (+) terminal are already short-circuited.
			EE-1009 *
	Connector with Cable	1 m	EE-1006 1M
		1 m	EE-1010 1M *
		2 m	EE-1006 2M
		2 m	EE-1010 2M *
	Connector with Robot Cable	1 m	EE-1010-R 1M *
	Connector with Robot Cable	2 m	EE-1010-R 2M *
Connector Hold-down Clip			EE-1006A	Applicable Photomicrosensors For EE-SY671 and 672 only. (Can be used only with EE-1006 Connectors for the Photomicrosensors listed above.)

Note: For details, refer to the Photomicro Sensors Accessories on EE-[] which can be accessed from your OMRON website.
* EE-1009- or EE-1010-series Connectors have a builtin locking mechanism to prevent cable disconnection when only the cable is pulled. To remove the Connector from the Sensor, grip the top and bottom of the Connector firmly and push into the Sensor once before pulling out. The locking mechanism prevents the Connector from being removed by pulling on the cable only and enables removal only when the Connector (housing) is pulled.

last update: January 5, 2017

Product Category

Sensors
- Photomicro Sensors
  - Diffuse-reflective
    - EE-SY671 / 672

Top of page