Menu
Industrial Automation
Discontinued On Mar. 2017
E3X-SD
Simple Fiber Amplifier
The Standard for Fiber Amplifiers with Simple Operation and High Performance
* Information in this page is a reference that you created on the basis of information in the product catalog before the end of production, may be different from the current situation, such as goods for / supported standards options / price / features of the product. Before using, please check the compatibility and safety system.
Related Contents
- Features
- Lineup
- Specifications
- Dimensions
- Catalog / Manual / CAD / Software
last update: September 24, 2012
Amplifier Units
| Type | Digital display and direct key setting | |
|---|---|---|
| Standard models | ||
| Model | E3X-SD[] | |
| Light source (wavelength) | Red LED (620 nm) | |
| Power supply voltage | 12 to 24 VDC ±10%, ripple (p-p): 10% max. | |
| Current consumption | 960 mW max. (Power supply: 24 V, Current consumption: 40 mA max.) | |
| Control output | Open-collector output (NPN or PNP)
Load power supply: 26.4 V max., Load current: 50 mA max. (Residual voltage: 1.5 V max.) Light-ON/Dark-ON mode selector |
|
| Response time | Operate or reset: 200 μs max. | |
| Sensitivity adjustment | UP/DOWN direct key setting, teaching | |
| Protection circuits | Power supply reverse polarity protection, output short-circuit protection, output
reverse polarity protection |
|
| Timer function | ON/OFF-delay timer: 10 ms (each fixed) | |
| Mutual interference
prevention |
Up to 5 Amplifiers (optically synchronized) | |
| Ambient illumination | Receiver side
Incandescent lamp: 10,000 lux max. Sunlight: 20,000 lux max. |
|
| Ambient temperature range | Operating:
Groups of 1 to 3 Amplifiers: -25°C to 55°C Groups of 4 to 11 Amplifiers: -25°C to 50°C Groups of 12 to 16 Amplifiers: -25°C to 45°C Storage: -30°C to 70°C (with no icing or condensation) |
|
| Ambient humidity range | Operating and storage: 35% to 85% (with no condensation) | |
| Insulation resistance | 20 MΩ. min. (at 500 VDC) | |
| Dielectric strength | 1,000 VAC at 50/60 Hz for 1 minute (*) | |
| Vibration resistance | Destruction: 10 to 55 Hz with a 1.5-mm double amplitude for 2 hrs each in X, Y and Z
directions |
|
| Shock resistance | Destruction: 500 m/s2, for 3 times each in X, Y and Z directions | |
| Degree of protection | IEC 60529 IP50 (with Protective Cover attached) | |
| Connection method | Pre-wired (standard cable length: 2 m), or connector | |
| Weight (packed state) | Pre-wired model: Approx. 100 g, Model with connector: Approx. 55 g | |
| Material | Case | Polybutylene terephthalate (PBT) |
| Cover | Polycarbonate | |
| Accessories | Instruction manual | |
* Models with connectors have a dielectric strength of 500 VAC.
Amplifier Unit Connectors
| Model | E3X-CN11 | |
|---|---|---|
| Rated current | 2.5 A | |
| Rated voltage | 50 V | |
| Contact resistance | 20 mΩ max. (20 mVDC max., 100 mA max.)
(The above figure is for connection to the Amplifier Unit and the adjacent Connector. It does not include the conductor resistance of the cable.) |
|
| Number of insertions | Destruction: 50 times (for connection to the Amplifier Unit and the adjacent Connector) | |
| Material | Housing | Polybutylene terephthalate (PBT) |
| Contact | Phosphor bronze/gold-plated nickel | |
| Weight (packed state) | Approx. 55 g | |
Sensing Distance
Through-beam Models
| Model | E3X-SD[] | ||
|---|---|---|---|
| Type | Standard
models |
||
| Standard
models |
Flexible
(new standard) |
E32-T11R/E32-T12R/E32-T15XR/E32-TC200BR (B4R) | 280 |
| E32-T14LR/E32-T15YR/E32-T15ZR | 110 | ||
| E32-T21R/E32-T22R/E32-T222R/E32-T25XR/E32-TC200FR (F4R) | 60 | ||
| E32-T24R/E32-T25YR/E32-T25ZR | 30 | ||
| Standard | E32-TC200/E32-T12/E32-T15X/E32-TC200B (B4) | 400 | |
| E32-T14L/E32-T15Y/E32-T15Z | 240 | ||
| E32-TC200A | 360 | ||
| E32-TC200E/E32-T22/E32-T222/E32-T25X/E32-TC200F (F4) | 100 | ||
| E32-T24/E32-T25Y/E32-T25Z | 90 | ||
| Break resistant | E32-T11/E32-T12B/E32-T15XB | 360 | |
| E32-T21/E32-T221B/E32-T22B | 100 | ||
| E32-T25XB | 75 | ||
| Fluorine coating | E32-T11U | 360 | |
| Special-
beam models |
Long distance,
high power |
E32-T17L | 14000 |
| E32-TC200 + E39-F1 | 3000 | ||
| E32-T11R + E39-F1 | 2100 | ||
| E32-T11 + E39-F1 | 2000 | ||
| E32-T14 | 1800 | ||
| E32-T11L/E32-T12L | 700 | ||
| E32-T11L + E39-F2 | 500 | ||
| E32-T11R + E39-F2 | 220 | ||
| E32-T11 + E39-F2 | 360 | ||
| E32-T21L/E32-T22L | 200 | ||
| Ultracompact,
ultrafine sleeve |
E32-T223R | 60 | |
| E32-T33-S5 | 20 | ||
| E32-T333-S5 | 5 | ||
| E32-T334-S5 | 2.5 | ||
| Fine beam
(narrow vision field) |
E32-T22S | 1000 | |
| E32-T24S | 700 | ||
| Area sensing | E32-T16PR | 450 | |
| E32-T16P | 600 | ||
| E32-T16JR | 390 | ||
| E32-T16J | 520 | ||
| E32-T16WR | 690 | ||
| E32-T16W | 920 | ||
| E32-T16 | 1500 | ||
| E32-M21 | 300 | ||
| Environment
resistive models |
Heat resistant | E32-T51 | 400 |
| E32-T54 | 130 | ||
| E32-T81R-S | 180 | ||
| E32-T61-S + E39-F2 | 390 | ||
| E32-T61-S + E39-F1 | 3000 | ||
| E32-T84S-S | 700 | ||
| E32-T61-S | 300 | ||
| Chemical resistant | E32-T11F | 1050 | |
| E32-T12F | 1600 | ||
| E32-T14F | 200 | ||
| E32-T51F | 700 | ||
| E32-T81F-S | 350 | ||
| Vacuum resistant | E32-T51V | 100 | |
| E32-T51V + E39-F1V | 600 | ||
| E32-T54V | 65 | ||
| E32-T54V + E39-F1V | 390 | ||
| E32-T84SV | 250 | ||
Reflective Models
| Model | E3X-SD[] | ||
|---|---|---|---|
| Type | Standard models | ||
| Standard
models |
Flexible
(new standard) |
E32-D11R/E32-D12R/E32-D15XR/
E32-DC200BR (B4R) |
90 |
| E32-D14LR | 16 | ||
| E32-D15YR/E32-D15ZR | 20 | ||
| E32-D211R/E32-D21R/E32-D22R/E32-D25XR/
E32-DC200FR (F4R) |
15 | ||
| E32-D24R | 7 | ||
| E32-D25YR/E32-D25ZR | 4 | ||
| Standard | E32-DC200/E32-D15X/E32-DC200B (B4) | 150 | |
| E32-D12 | 120 | ||
| E32-D14L | 40 | ||
| E32-D15Y/E32-D15Z | 50 | ||
| E32-D211/E32-DC200E/E32-D22/E32-D25X/
E32-DC200F (F4) |
36 | ||
| E32-D24 | 15 | ||
| E32-D25Y/E32-D25Z | 10 | ||
| Break resistant | E32-D11/E32-D15XB | 90 | |
| E32-D21B/E32-D221B | 35 | ||
| E32-D21/E32-D22B | 15 | ||
| E32-D25XB | 25 | ||
| Fluorine coating | E32-D11U | 90 | |
| Special-
beam models |
Long distance,
high power |
E32-D16 | 40 to 400 |
| E32-D11L | 200 | ||
| E32-D21L/E32-D22L | 50 | ||
| Ultracompact,
ultrafine sleeve |
E32-D33 | 10 | |
| E32-D331 | 1.5 | ||
| Coaxial,
small spot |
E32-CC200R | 75 | |
| E32-CC200 | 150 | ||
| E32-D32L | 80 | ||
| E32-C31/E32-D32 | 40 | ||
| E32-C42 + E39-F3A | Spot diameter of 0.1 to 0.6 mm at
6 to 15 mm. |
||
| E32-D32 + E39-F3A | Spot diameter of 0.5 to 1 mm at
6 to 15 mm. |
||
| E32-C41 + E39-F3A-5 | Spot diameter of 0.1 mm at 7 mm. | ||
| E32-C31 + E39-F3A-5 | Spot diameter of 0.5 mm at 7 mm. | ||
| E32-C41 + E39-F3B | Spot diameter of 0.2 mm at 17 mm. | ||
| E32-C31 + E39-F3B | Spot diameter of 0.5 mm at 17 mm. | ||
| E32-C31 + E39-F3C | Spot diameter of 4 mm max. at
0 to 20 mm. |
||
| Area sensing | E32-D36P1 | 75 | |
| Retro-reflective | E32-R21 + E39-R3 (provided) | 10 to 250 | |
| E32-R16 + E39-R1 (provided) | 150 to 1500 | ||
| Convergent-
reflective |
E32-L25/E32-L25A | 3.3 | |
| E32-L24S | 0 to 4 | ||
| E32-L24L | 2 to 6 (center 4) | ||
| E32-L25L | 5.4 to 9 (center 7.2) | ||
| E32-L86 | 4 to 10 | ||
| E32-L16 | 0 to 15 | ||
| Environment
resistive models |
Heat resistant | E32-D51 | 120 |
| E32-D81R/E32-D61 | 45 | ||
| E32-D73 | 30 | ||
| Chemical
resistant |
E32-D12F | 50 | |
| E32-D14F | 20 | ||
last update: September 24, 2012
Product Category
- Sensors
-
Fiber Sensors
-
Discontinued
- E3X-SD
-
Discontinued
-
Top of page
Products
Menu
About Us
Menu
Solutions
Menu
Privacy
Menu
Services
Menu
Resources
Menu
© Copyright OMRON Corporation 2000-2020. All Rights Reserved.