PCB Inspection System
last update: February 13, 2024
Type | VT-S1080-V2.0 | VT-S1040-V2.0 | VT-Z600-V2.0 | |
---|---|---|---|---|
Outer dimentions | 1180(W) x 1450(D) x 1500(H)mm | |||
Weight | Approx. 1240Kg | |||
Power supply | 200 to 240 V AC (Single phase); Voltage fluctuation range ±10% 50/60Hz | |||
Rated power | 2.0 kVA (Maximum current 10 A) | |||
Line height | 900±20mm | |||
Air supply | Not required | |||
Operating temperature
range |
10~35℃ | |||
Operating humidity
range |
35 to 80% RH (Non-condensing) | |||
Camera | Top | 12Mpix | ||
Angle | 5Mpix | - | - | |
Resolution | Top | 12.5μm | ||
Angle | 10μm | - | - | |
FOV | Top | 52.5 x 52.5mm | ||
Angle | 25.9 x 19.4mm | - | - | |
Inspection principle | MDMC*12 illumination+3D
reconstruction through MPS *13 |
MDMC*12 illumination+3D
reconstruction through MPS *13*14 |
MDMC illumination | |
Supported
PCB size |
Size | Single lane: 50(W) x 50(D)~510(W) x 680(D)mm
Dual lane: 50(W) x 50(D)~510(W) x 330(D)mm |
||
Thickness | 0.4~4mm | |||
Weight | 4Kg | |||
Clearance | Above the conveyor belt: 54 mm or less; Below the conveyor belt: 50 mm or less
(Including board thickness/curvature/bend/part tolerance, etc.) |
|||
Height measurement
range |
25.4mm | - | ||
Inspection item | Component height, lift, tilt, missing or wrong component,
wrong polarity, flipped component, OCR inspection, 2D code, component offset (X/Y/rotation), fillet (height/length, end joint width, wetting angle, side joint length), exposed land, foreign material, land error, lead offset, lead posture, lead presence, solder ball, solder bridge, distance between components, component angle |
Missing or wrong component,
wrong polarity, flipped component, OCR inspection, 2Dcode, component offset (X/Y/rotation), fillet (height/length, end joint width, wetting angle, side joint length)*9, exposed land, foreign material, land error, lead offset, lead posture, lead presence, solder ball, solder bridge, distance between components, component angle |
*12. MDMC:Multi Direction/Multi Color
*13. MPS:Micro Phase Shift
*14. Option
last update: February 13, 2024