E3NX-MA

This new 2-ch fiber amplifier unit has two-unit functions in the dimensions of the general one-unit. You need only half the number of units, substantially contributing to downsizing your equipment and control panels. More over, you can substantially reduce the purchase cost, wiring work, and power consumption.

[Optical Coupling Efficiency of 40%]
Since the distance between the fiber and the LED is short, light is transmitted without loss.
The lens and reflector emit powerful, uniform emission.

The influences of noise are reduced to achieve stable incident light levels by increasing the number of samples taken.
This increases the margin for threshold values to achieve stable detection.

You can confirm changes in displayed values for fast workpieces to accurately set the threshold.

Power is supplied from the Master Connector; the Slave Connectors have output lines only. Since there are no Master/Slave distinctions in amplifier units, you can unify the stock into one model type.

Use Sensor Communications Units to save more wiring and remotely control up to 15 amplifier units (total 30 channels). Full-view screen for 2-ch threshold and light intensity is available; Collective setting reduces equipment commissioning time. The system monitors equipment conditions for preventive maintenance, and reduces downtime in case of trouble, enabling safe and stable operation of equipment.

Output of the logical operation results between 1-ch and 2-ch sensing is possible.

Outputs discriminating the combination of operational results are possible: AND operation outputs when both 1ch and 2ch are turned ON, OR operation outputs when either 1ch or 2ch is turned ON, or when both 1ch and 2ch are turned ON, and XOR operation outputs when only either 1ch or 2ch is turned ON.