F3SR-B

Safety Light Curtain

F3SR-B

For Safety Light Curtain Robust & Basic New Lineup. Understanding the Indicators at a Glance.

* Information in this page is a reference that you created on the basis of information in the product catalog before the end of production, may be different from the current situation, such as goods for / supported standards options / price / features of the product. Before using, please check the compatibility and safety system.

last update: August 20, 2014

Main Unit

Model	*F3SR-430B 1**
Sensor type	Type 4 safety light curtain
Applicable safety category	Category 4, 3, 2, 1, or B
Detection capability	Opaque objects 30 mm in diameter
Beam gap	20 mm
Number of beams	8 to 112
Protective height	190 to 2,270 mm
Lens diameter	7 mm x 12 mm
*Operating range 2**	For long distance wiring: 5 to 20 m For short distance wiring: 0.3 to 7 m
Response time	ON to OFF: 15 ms max., OFF to ON: 60 ms max.
Startup waiting time	2 s max.
Power supply voltage (Vs)	24 VDC±20 % (ripple p-p 10% max.)
Current consumption (no load)	Refer to "List of Models/Current Consumption" below.
Light source (emitted wavelength)	Infrared LED (870 nm)
Effective aperture angle (EAA)	Based on IEC61496-2. Within ±2.5° for the emitter and receiver when the operating range is 3 m or over.
Safety output (OSSD)	Two PNP transistor outputs, load current 500 mA max., residual voltage 2 V max. (except for voltage drop due to cable extension), leak current 1 mA max. Allowable capacity load differs depending on the total cable length as shown below. *3 100 m max.: 0.05 µF max. 70 m max.: 0.5 µF max. 50 m max.: 1.0 µF max.
Output operation mode	ON when receiving light
Input voltage	Test input, reset input, external device monitoring input, and function selection input are all ON voltage: 11 to 24 V OFF voltage: 0 to 5 V, or open Operating range selection input ON voltage: 11 to 24 V OFF voltage: 0 to 5 V
Input current	Test input, reset input, function selection input: 1.5 to 3 mA Operating range selection input: 1.5 to 4 mA External device monitoring input: 10 to 20 mA
Indicators	Refer to "Indicators" on Data Sheet.
Mutual interference prevention function	Interference prevention algorithm prevents mutual interference for up to three sets.
Test functions	Self test (when power is turned ON and while power is supplied) External test (emission stop function by test input)
Safety functions	External device monitor Start interlock, restart interlock
Connection type	Connectors (M12, 8-pin)
Protection circuits	Output short-circuit protection, and power supply reverse polarity protection
Ambient temperature	Operating: -10 to 55°C (no icing), Storage: -25 to 70°C
Ambient humidity	Operating: 35% to 85% (no condensation), Storage: 35% to 95%
Ambient operating light intensity	Incandescent lamp: 3,000 lx max. (light intensity on the receiver surface), Sunlight: 10,000 lx max. (light intensity on the receiver surface)
Insulation resistance	20 MΩ (at 500 VDC)
Dielectric strength	1,000 VAC 50/60 Hz, 1 min
Degree of protection	IP65, IP67 (IEC60529)
Vibration resistance	Malfunction: 10 to 55 Hz, 0.7-mm double amplitude, 20 sweeps in X, Y, and Z directions
Shock resistance	Malfunction: 100 m/s², 1,000 times each in X, Y, and Z directions
Power supply cable	6-mm-dia., allowable bending radius R5 mm
Extension cable	6.6-mm-dia., 8-pin (0.3 mm² × 4P, resistance 0.058 Ω/m) with braided shield, allowable bending radius R36 mm Total cable length: 100 m max. For details on twisted pairs, refer to "Single-end Connector Cable" on Data Sheet. Refer to "Double-end Connector Cable" on Data Sheet.
Materials	Casing: Aluminum, zinc die-cast Optical cover: PMMA resin (acrylic), cable: Oil resistant PVC
Weight	Model: F3SR-430B[][][][] ([]: protective height) Equation: Weight (g) = (protective height) x 4 + α The values for α are as follows: Protected height 190 mm : 1,100 Protected height 270 mm to 510 mm : 1,500 Protected height 590 mm to 1,070 mm : 2,000 Protected height 1,150 mm to 2,270 mm : 2,500
Accessories	User's Manual
Applicable standards	EN61496-1 (Type 4 ESPE), CLC/TS61496-2 (Type 4 AOPD), EN61508-1 to 3 (SIL3), EN62061 (SIL3), EN61000-6-4 ISO13849-1 (PLe/Safety Category 4), IEC61496-1 (Type 4 ESPE), IEC61496-2 (Type 4 AOPD), IEC61508-1 to 3 (SIL3), IEC62061 (SIL3), UL application in process (as of August 1, 2009)

*1. In the type names in this table, the contain the [][][][] 4 digits indicating the protective height (mm).
*2. Use of the Spatter Protection Cover causes a 10% maximum operating range attenuation.
*3. These values should be considered when additionally connecting elements such as capacitor that contains capacitive load.

List of Models/Current Consumption

Model	Number of beams	Protective height (mm)	Current consumption
			Emitter		Receiver (no load)
			Operating range (Short)	Operating range (Long)	Operating range (Short)	Operating range (Long)
F3SR-430B0190	8	190	38 mA	44 mA	57 mA	64 mA
F3SR-430B0270	12	270	40 mA	47 mA	59 mA	66 mA
F3SR-430B0350	16	350	42 mA	50 mA	60 mA	67 mA
F3SR-430B0430	20	430	43 mA	53 mA	62 mA	69 mA
F3SR-430B0510	24	510	45 mA	57 mA	63 mA	70 mA
F3SR-430B0590	28	590	47 mA	60 mA	65 mA	72 mA
F3SR-430B0670	32	670	48 mA	63 mA	66 mA	73 mA
F3SR-430B0750	36	750	50 mA	66 mA	68 mA	75 mA
F3SR-430B0830	40	830	52 mA	69 mA	69 mA	76 mA
F3SR-430B0910	44	910	53 mA	73 mA	71 mA	78 mA
F3SR-430B0990	48	990	55 mA	76 mA	72 mA	79 mA
F3SR-430B1150	56	1150	58 mA	82 mA	75 mA	82 mA
F3SR-430B1310	64	1310	61 mA	89 mA	78 mA	85 mA
F3SR-430B1470	72	1470	65 mA	95 mA	81 mA	88 mA
F3SR-430B1630	80	1630	68 mA	102 mA	84 mA	91 mA
F3SR-430B1790	88	1790	71 mA	108 mA	87 mA	94 mA
F3SR-430B1950	96	1950	74 mA	114 mA	91 mA	98 mA
F3SR-430B2110	104	2110	78 mA	121 mA	94 mA	101 mA
F3SR-430B2270	112	2270	81 mA	127 mA	97 mA	104 mA

Accessories

Control Unit

Model		F3SP-B1P
Power supply voltage		24 VDC±10%
Power consumption		DC1.7 W max. (not including sensor's current consumption)
Operation time		100 ms max. (not including sensor's response time)
Response time		10 ms max. (not including sensor's response time)
Relay output	Number of contacts	3NO+1NC
	Rated load	25 VAC, 5 A (cos Φ = 1), 30 VAC, 5 A L/R = 0 ms
	Rated current	5 A
Connection type	Between sensors	M12 connector (8-pin)
Connection type	Others	Terminal block
Weight (packed state)		Approx. 280 g
Accessories		Instruction manual

Laser Pointer

Model	F3SP-B1P
Applicable sensor	F3SR series
Power supply voltage	4.65 VDC or 4.5 VDC
Battery	Button cell battery (SR44 or LR44)
Battery life *	SR44: approx. 10 continuous hours, LR44: approx. 6 continuous hours
Light source	Red LED laser (wavelength 650 nm, 1 mW max., JIS class 2, EN/IEC CLASS 2, FDA CLASS 2)
Spot diameter (typical)	6.5 mm (at 10 m)
Ambient temperature	Operating: 0 to 40°C (no icing) Storage: -15 to 60°C (with no icing or condensation)
Ambient humidity	Operating and storage: 35% to 85% (with no condensation)
Material	Laser module case: aluminum Mounting part: aluminum, stainless steel
Weight	Approx. 250 g (packed state)
Accessories	Laser labels (EN: 1, FDA: 3), button cell battery (SR44: 3), instruction Sheet

* Varies on battery type.

last update: August 20, 2014

Product Category

Safety Components
- Safety Light Curtains / Safety Multi-Light Beams / Single-beam Safety Sensors
  - Discontinued
    - F3SR-B

Top of page