F3W-E

Picking Sensor

F3W-E

Compact Body, High-visibility Indicators, and Ideal for Picking Systems for Small Parts.

* Information in this page is a reference that you created on the basis of information in the product catalog before the end of production, may be different from the current situation, such as goods for / supported standards options / price / features of the product. Before using, please check the compatibility and safety system.

last update: September 23, 2012

Sensing method Model		Through-beam
Sensing method Model		F3W-E032A6/A8	F3W-E032B6/B8
Sensing distance		30 to 300 mm
Beam gap		25 mm
Number of beams		3
Sensing width		50 mm
Standard sensing object		Opaque, 28-mm dia. min.
Light source (emission wavelength)		Infrared LED (860 nm)
Power supply voltage		12 to 24 VDC ±10% (ripple (p-p): 10% max.)
Current consumption		Emitter: 40 mA max., Receiver: 40 mA max.
Control output		NPN or PNP open collector output Load power supply: 30 VDC, Load current: 100 mA max. (Residual voltage: 1.8 V max.) Dark-ON or Light-ON (selectable)
Picking instruction indicator input		Relay or open collector input NPN input Indicator ON: Input voltage of 0 to 2 V Indicator OFF: Open (with leakage current of 0.1 mA max.) PNP input Indicator ON: Input voltage: (+DC - 2 V) to +DC * Indicator OFF: Open (with leakage current of 0.1 mA max.)
Emission stop input		Relay or open collector input NPN input Emission stop input voltage: 0 to 2 V Emission input voltage: Open (with leakage current of 0.1 mA max.) PNP input Emission stop input voltage: (+DC - 2 V) to +DC * Emission input voltage: Open (with leakage current of 0.1 mA max.)
Protection circuits		Reverse-connection protection, output short protection, and mutual interference prevention function (set with frequency switch)
Response time		Operate/Reset: 100 ms max.
Indicators	Receiver	Operation indicator (orange), stability indicator (green), and picking indicators (orange)
Indicators	Emitter	Power indicator (green), emission stop indicator (orange), and picking indicators (orange)
Ambient temperature		Operating: -10 to 55 ° C, Storage: -25 to 70 ° C (with no icing or condensation)
Ambient humidity		Operating/storage: 35% to 85% (with no condensation)
Ambient illumination		Sunlight: 10,000 lx at light-receiving surface, Incandescent light: 3,000 lx at light-receiving surface
Insulation resistance		20 M Ω min. (at 500 VDC)
Dielectric strength		1,000 VAC, 50/60 Hz for 1 min
Vibration resistance (destruction)		10 to 50 Hz, 1.5-mm double-amplitude for 2 hours each in X, Y, and Z directions
Shock resistance (destruction)		500 m/s², 3 times in X, Y, and Z directions
Degree of protection		IP62 (IEC60529)
Connection method		Pre-wired Standard cable length: 2 m	Pre-wired connector Standard cable length: 0.3 m (M12, 4-pin connector)
Weight (packed state)		Approx. 125 g	Approx. 85 g
Materials	Case	ABS resin
	Lens	Acrylic resin
	Cable	Oil-resistant PVC
Accessories		Instruction manual

*+DC is the power supply voltage.

last update: September 23, 2012

Product Category

Sensors
- Photoelectric Sensors
  - Discontinued
    - F3W-E

Top of page