KS1

Ionizer (Air Push Type)

KS1

Wide Range of Nozzles for Optimal Ionization

* Information in this page is a reference that you created on the basis of information in the product catalog before the end of production, may be different from the current situation, such as goods for / supported standards options / price / features of the product. Before using, please check the compatibility and safety system.

last update: May 23, 2013

Ionizer

Model	KS1-AA1T
Power supply voltage	24 VDC ±5%
Current consumption	Approx. 100 mA
Discharge method	High-frequency AC (Approx. 68 kHz)
Output voltage	±2 kV
Safety circuit	Outputs alarms for ionization errors
Discharge time	0.8 s max. (at a distance of 50 mm from air outlet)
Ion balance	±15 V or less (at a distance of 50 mm from air outlet)
Fluid used	Air (refer to Air Used on Catalog)
Amount of	0.04 ppm or less (when standard nozzle used, at a distance of 300 mm from air outlet and primary side voltage of
generated ozone	0.25 MPa)
Supplied air flow	Approx. 100 L/min (ANR) (when standard nozzle used, at primary side voltage of 0.15 Mpa)
Indicators	Green POWER indicator lit while Ionizer ON, red ALM indicator lit for ionizing errors.
Air pressure range	When Standard Nozzle or Flexible Tube Nozzle is used.	0.02 to 0.25 MPa
	When Standard Nozzle Tube is attached.	0.02 to 0.12 MPa
	When Shower Nozzle, Flat Nozzle, or Straight Bar Nozzle is used.	0.05 to 0.40 MPa
Operating ambient temperature	0 to 40°C (with no icing or condensation)
Operating ambient humidity	35% to 65% (with no condensation)
Weight	235 g (Ionizer only)
Accessories	One ground lead (2 m)

Air Clean Filter

Can be attached directly to the ionizer.
Diameter of collected particles with high filtration accuracy: 0.1 μm, collection efficiency: 99.9%.

Model	KS1-AZ04
Fluid used	Air
Connection aperture	R(Rc)1/8
Collected particle size	0.1 μm
Collection efficiency	99.9%
Volume of air processed	40 l/min (ANR) *
Film area	29.9 cm²
Max. voltage used	0.97 MPa
Withstanding pressure	1.47 MPa
Operating temperature range	5 to 45°C
Weight	11 g
Recommended tightening torque	400 to 600 Ncm
Unit material	Aluminum alloy (alumite treated)
Element material	Porous, hollow thread membrane

* At 0.7 MPa (pressure drop of 0.03 MPa)

last update: May 23, 2013

Product Category

Power Supplies / In Addition
- Static Electricity Components
  - Discontinued
    - KS1

Top of page