Menu
Industrial Automation
CX-Designer
FA Integrated Tool Package CX-One
Intuitive operability will increase programming efficiency from screen data creation to debugging for NS-B Series and NS Series.
Related Contents
Application Solutions
last update: October 1, 2026
Software
How to Select Required Support Software for Your Controller
The required Support Software depends on the Controller to connect. Please check the following table when purchasing the Support Software.
| Item | Omron PLC System | Omron Machine Automation Controller System |
|---|---|---|
| Controller | CJ, CS, CP, and other series | NJ-series |
| Programmable Terminals | NS-B-series, NS-series | NS-B-series, NS-series with an Ethernet port |
| Software | FA Integrated Tool Package CX-One | Automation Software Sysmac Studio |
Supported CX-Designer Versions
The CX-Designer versions supported by the NS-B Series and NS Series are shown below.
| CX-Designer | NS-B Series | NS Series |
|---|---|---|
| Ver.4.[] or later | Supported | Not Supported |
| Ver.3.[] or earlier | Not Supported | Supported |
Note: 1. The NS-B Series supports CX-Designer Ver.4.[] or later.
The conventional NS Series supports CX-Designer Ver.3.[] or earlier.
The supported CX-Designer version differs between the NS-B Series and NS Series.
2. CX-Designer Ver.4.[] is supported only on Windows 11.
FA Integrated Tool Package CX-One
| Product
name |
Specifications | Model | Stand-
ards |
||
|---|---|---|---|---|---|
| Number of
licenses |
Media | ||||
| FA Integrated
Tool Package CX-One Ver.4.[] |
The CX-One is a package that integrates
the Support Software for OMRON PLCs and components. CX-One Ver.4.[] includes CX-Designer Ver.3.[] and Ver.4.[]. |
1 license
*1 |
DVD | CXONE-AL01D-V4 | - |
Note: 3. For details, refer to the CX-One Catalog (Cat. No. R134), visit your local OMRON website.
*1. Multi licenses (3, 10, 30, or 50 licenses) and DVD media without licenses are also available for the CX-One.
Automation Software Sysmac Studio
Please purchase a DVD and required number of licenses the first time you purchase the Sysmac Studio. DVDs and licenses are available individually. Each model of licenses does not include any DVD.
| Product
name |
Specifications | Model | Stand-
ards |
||
|---|---|---|---|---|---|
| Number of
licenses |
Media | ||||
| Sysmac
Studio Standard Edition Ver.1.[] |
The Sysmac Studio is the software that provides
an integrated environment for setting, programming, debugging and maintenance of machine automation controllers including the NJ/NX-series CPU Units, NYseries Industrial PC, EtherCat Slave, and the HMI. The Sysmac Studio Standard Edition DVD includes Support Software to set up EtherNet/IP Units, DeviceNet slaves, Serial Communications Units, and Support Software for creating screens on HMIs (CX-Designer). *3 |
-
(Media only) |
Sysmac
Studio (32-bit) DVD |
SYSMAC-SE200D | - |
| -
(Media only) |
Sysmac
Studio (64-bit) DVD |
SYSMAC-SE200D-64 | - | ||
| 1 license
*2 |
- | SYSMAC-SE201L | - | ||
Note: 4. For details, refer to the Sysmac Studio Ver.1.[][] datasheet, visit your local OMRON website.
5. To connect the NJ5 Controller, NS system version 8.5 or higher is required. CX-Designer version 3.3 or higher is also required.
To connect the NJ3 Controller, NS system version 8.61 or higher is required. CX-Designer version 3.4 or higher is also required.
*2. Multi licenses are available for the Sysmac Studio (3, 10, 30, or 50 licenses).
*3. CX-Designer includes Ver.3.[] and Ver.4.[].
Product Configuration
FA Integrated Tool Package CX-One
| Components | Details |
|---|---|
| Introduction | A4 size, English/Japanese |
| Setup disk | (DVD) DVD 1 piece in the case |
| User registration card | Product Registration Guide, Japanese
User license agreement/User registration card, English/Japanese |
Automation Software Sysmac Studio
DVD (SYSMAC-SE200D)
| Components | Details |
|---|---|
| Introduction | An introduction about components, installation/uninstallation, user registration and auto
update of the Sysmac Studio is provided. |
| Setup disk (DVD-ROM) | 1 |
License (SYSMAC-SE2[][]L)
| Components | Details |
|---|---|
| Introduction | An introduction about components, installation/uninstallation, user registration and auto
update of the Sysmac Studio is provided. |
| License certificate | A model number, version, license number, and number of licenses are described. |
| User registration card | Two cards are contained. One is for users in Japan and the other is for users in other
countries. |
last update: October 1, 2026
Top of page
Products
Menu
About Us
Menu
Solutions
Menu
Privacy
Menu
Services
Menu
Resources
Menu
© Copyright OMRON Corporation 2000-2020. All Rights Reserved.