|
Specifications that can
be offered only by the well-versed Unipulse-all mobilized into the a small
body, is the new weighing solution
High Speed A/D Conversion
with High Resolution
A 500 times/sec high-speed conversion to
counter fluctuations in weight value. Also, when it is set to the 1/4
scale division compliance to the Weight and Measurement Law, it guarantees
1/10000 display resolution at all input range (1/40000 when not set at 1/4
scale division). Its accuracy is most desired by demanding weighing
requirements.
Weighing Sequence
Function
By only entering the setting instruction,
feeding and discharging gate can be directly controlled. All weighing
control is performed by F159 Load Cell Interface to lighten CJ1 load so that a high-speed
weighing and control line can be set-up without it being affected by CJ1
command timing.
Auto Free-fall
Compensation
F159 Load Cell Interface automatically
compensates fluctuations in actual free fall, which is one of the biggest
factors that causes weighing error.
Gravitational
Acceleration Compensation
Even when calibration site and installation
site are at different locations, calibration can be completed by just
setting the gravitational acceleration of the installation site. There is
no further need to perform re-calibration at the installation site.
Zero Tracking
The slow zero drift, which is caused by
temperature fluctuation, and the zero point shift are automatically
compensated.
Powerful Filters to
Eliminate Mechanical Vibrations
Installed with Bessel low-pass filter, which
has powerful damping characteristics, and moving average-type digital
filter.
|
Clearance Centre
