|
|
 |
 |
|
Product Index ::
Automation Systems
:: Motion Control ::
Motion Controllers
|
|
CJ1W-NC271/471
CJ1W-NCF71
CJ1W-NCF71-MA |
CS1W-NC271/471
CS1W-NCF71 |
SYSMAC CJ/CS Series Position
Control Units
|
|
|
|
* Ordering information
* Specifications
* Configurations
* Dimensions, and etc
|
|
can be found in our PDF brochure.
|
|
Decrease TCO with Simple
Operation, Reduced Wiring, Batch Settings, and Batch Management.
Control Servos for up to
16 Axes in a Motion Network with One Position Control Unit that Supports
MECHATROLINK-II. Support OMNUC G Series, W Series and SMARTSTEP Junior.
Even Smaller: Positioning of up to
16 axes can be controlled with a body the size of one CS/CJ-series Unit.
The compact body provides a perfect fit to meet the need for downsizing
of equipment for multi-axis control.
Single-cable Connection with Flexible
Wiring Placement: With MECHATROLINK-II, connecting to the Servo
Drive is easy. Just use a single cable (2-core shielded twisted-pair
cable). Reduced wiring, with a total cable length of 50 m (or 30 m for
16 axes), allows more freedom in constructing systems.
Less Time Spent on Startup and
Maintenance: Servo parameters can be set from the PLC. This means
that settings and adjustments can be performed from one location
rather than having to connect to each Servo Drive separately.
Simple Expansion: An easily
expandable system can be constructed that is just as efficient now with
a few axes or later with up to 16 axes.
Linked Operation of Multiple Axes with
MA Functionality: The addition of an Interpolation Compensation Axis
Stop Mode Setting and Interaxial Allowance Deviation Setting to linear
interpolation compensation enables easier setting of linked operation
between axes.
|
|
New
Lineup |
|
SYSMAC CS/CJ Series Position Control Units
MECHATROLINK-II (for 2 or 4 Axes)
CJ1W-NC271/471
CS1W-NC271/471
SYSMAC CJ Series Position Control Units
MECHATROLINK-II (for 16 axes with 2-axis
linear interpolation)
CJ1W-NCF71-MA
-
Linear interpolation is enhanced for use
in conveyor control with 2-axis bilateral movement for large panels,
such as LCD and plasma.
-
Interaxial
Deviation Monitor for Linear Interpolation
When linear interpolation is used, it is possible to monitor the current
feedback position of up to two selected axes and to decelerate the axes
to a stop if the deviation between the axes exceeds the setting.
-
Interaxial Stop
Mode Setting for Linear Interpolation
Previously, if a Servo error occurred on one axis, the other axis would
decelerate to a stop, but now it is possible for the other axis to use
the same stopping mode as the axis with the error by selecting emergency
stop or Servo unlock.
Note: The functionality described
above is only for the CJ1 Series CJ1W-NCF71-MA.
|
|
Features |
 |
Feature 1:
More Compact
Even Smaller
-
Previously, W-series Units had to be
connected to a MECHATROLINK-II Module. Now, OMNUC W-series AC Servo
Drivers with built-in MECHATROLINK-II communications are available.
This reduces the volume to 2/3 or more of previous models.
|
|
|
Feature 2:
Less Wiring
Single-cable connection
offers wiring flexibility
|
 |
|
Feature 3:
Centralized Data Control
Less Time Spent on
Startup and Maintenance
-
Servo Drive parameters can be set from
the PLC. This means that settings and adjustments can be performed
from one location rather than having to connect a Programming Device
to each Servo Drive individually. Servo Drive alarm status and other
information, such as speed and torque, can also be monitored from the
PLC.
|
 |
|
Feature 4:
Multi-axis Control
Simple Expansion
|
|
|
|
|
Applications
|
|
|
System
Configurations
|
|
|
|
 top |
See Related Products:
|
Programmable
Controller
CJ1H / CJ1G
Compact PLC with flexible
configuration. |
|
Motion Control Unit
CS1W-MCH71/ CJ1W-MCH71
High-precision motion control with
less wiring using MECHATROLINK-II Servo communications with superior
concurrency. |
|
|
 |
|
Clearance Centre
