Main :: Safety Solutions :: Safety Limit Switches

 • Lineup includes three-contact models with 2NC/1NO and 3NC contact forms and MBB models in addition to the previous 1NC/1NO and 2NC contact forms.

 • M12-connector models are available, saving on labor and simplifying replacement.

 • Standardized gold-clad contacts provide high contact reliability. Can be used with both standard loads and microloads.

 • Conforms to European environmental restriction in the RoHS Directives.

EN60947-5-1
GS-ET-15
SUVA
UL508
CSA C22.2
No.14

• TÜV, Product service

• BIA

• SUVA

• UL

• UL (cUL)

 • Adds a self-holding head to conventional limit switch with a positive opening mechanism.

 • Lineup includes three-contact models with 2NC/1NO and 3NC contact forms in addition to the previous 1NC/1NO, and 2NC contact forms.

 • M12-connector models are available, saving on labor and simplifying replacement.

EN60947-5-1
UL508
CSA C22.2
No.14

• TÜV, Product service

• UL

• UL (cUL)

 • World's smallest four-contact limit switch with a direct opening mechanism.

 • High-sensitivity safety limit switches.

 • Built-in switches with two- or four-terminal contact construction are available.

 • Degree of protection: IP67.

EN60947-5-1
GS-ET-15
UL508
CSA C22.2
No.14

• TÜV, Product service

• UL

• UL (cUL)

 • Direct opening mechanism pulls the contacts apart from each other if any abnormality, such as contact welding, should occur in the contact area.

 • Equipped with a mechanism that indicates the applicable operating zone, as well as push-button switching to control left and right motion.

 • Degree of protection: IP67.

• TÜV, Rheinland

• BIA

• SUVA

• UL

• CSA