Page top

Australia   Phone: 1300 766 766

MX-Z2000H Series

Fiber Laser Marker

MX-Z2000H Series

Great for either deep or shallow engraving in metals, marking on plastics/resins or plastic films, and for fine processing. Mark anything from electronic parts to automotive parts.

High Speed and High Quality in a Wide Variety of Applications
Marking Flexibility

Marking Freedom with Two Operating Modes: Fine Detail to Deep Engraving

Standard Mode

Our exclusive flexible pulse control (up to 1MHz, adjustable 1 - 20 pulses) enables optimum marking and processing for a variety of materials and applications, such as marking/processing that is difficult to heat, heated marking/processing, etc.

MX-Z2000H Series Features 3

[NEW] Optional EE Mode (Energy Enhanced Mode)

Deep engraving of metal. rough polishing, and other energy-intense processing becomes possible with expanded and enhanced flexible pulse control, and pulse streams up to 30 pulses.

MX-Z2000H Series Features 4

Marking Freely Even on Cones and Spheres

[NEW] High-precision Z-axis Flexibility

Clean marking is now possible for 3D surfaces, such as stepped, sloped, curved, conical and spherical surfaces without any additional software.

MX-Z2000H Series Features 6

Mark Clearly and Cleanly Even at High Speed

G-DAC

G-DAC stands for the OMRON-developed Galvano Dynamic Acceleration Control.

The G-DAC feature adjusts the speed for optimum performance, based on the marking details.
This speed flexibility enables high-speed, clean marking.

MX-Z2000H Series Features 9

Note: G-DAC performance depends on the application. Be sure to test your application in advance.

Enhanced Usability Improves Productivity
Tsunagi & Tracing

Position-correction without a PLC

[NEW] Direct Finder Link

The MX-Z2000H series enables the kind of image processing and marking that traditionally required PLC processing, without the PLC.

MX-Z2000H Series Features 13

Notes:
1. The optional finder feature is required to use this function.
2. As of March 2016, the FH series is the only compatible image processing system.
Talk to your local OMRON representative for OMRON FH series details.

Example Application

To mark in the correct place, the image processing system can measure the position difference, compensate and mark in the correct place. It can also read a 2D code and make a decision based on it.

MX-Z2000H Series Features 14

Easily Configure a Traceability System

[NEW] Traceability Log

Archive marking data, and other data to a log, etc. Simplify both traceability and preventive maintenance.

MX-Z2000H Series Features 16

Smoothly Integrate External Control

[NEW] EtherNet/IP™ Compatibility

The MX-Z2000H series is compatible with various kinds of external control. Built-in I/O connections, RS-232C, Ethernet, and Ethernet/IP™ simplify programming to control the system from a PLC.

MX-Z2000H Series Features 18

Marking for Small Lots with Multiple Variants

Data can be shared with external storage

The MX-Z2000H series can access and marking data that is stored on an Ethernet server to keep up with the tremendous amount of data used for multi-variant, small lot productions. This simplifies the switching of marking data for each variant.

MX-Z2000H Series Features 20

Compatible with Severe Conditions and International Standards
Durability/Safety

Stable Operation Even in Dusty/Wet Environments

[NEW] Durable IP65 Head

The laser head (where the laser light is emitted) has a double glass cover to keep dust and moisture away and ensure air-tightness.

MX-Z2000H Series Features 23

Meets Safety Requirements and Standards

[NEW] Built-in Safety Relay Circuit

When building a product to meet the ISO 13849-1 (JIS-B9705-1) criteria, you have to provide safety measures for the total device in which the laser marker is installed. The MX-Z2000H series have 2 safety relays in the controller, and sending an emergency stop signal from an external controller to the interlock terminals will absolutely stop the power supply to the laser.

MX-Z2000H Series Features 25

[NEW] Meets Each Standard and Regulation

The laser markers meet each standard and regulation. They can now be used internationally.
Note: For details about exact countries and areas, contact your local OMRON representative.

Reducing Effort with Easy Operability

Edit the Marking Data Directly on the Laser Marker

Editing Data

There is no need to buy separate editing software, or a computer to edit data. Data editing functionality is built right into the laser marker itself, simplifying the process.

MX-Z2000H Series Features 29

Offline Editing Software is Also Standard

You can also use a separate computer if you choose, to create and edit the print data, including graphics, with the same functionality as is built into the laser marker.

MX-Z2000H Series Features 30

Simplifying Positioning and Other Floor Work

Optional Features

Finder

The Finder feature enables visual positioning of small parts for marking/processing, as well as automated positioning and inspection with an image processing system.

MX-Z2000H Series Features 33
MX-Z2000H Series Features 34