Red-Green Display Allows Easy Recognition of Judgment Results
The measurement value display can be set to switch between red and green in accordance with the status of comparative outputs. This means that the status can be ascertained at a distance.
Position Meter Enables Easy
Monitoring of Operating Status Trends
The present value with respect to the measurement or display range (full scale) can be viewed on a bar display. This means that the operating status can be grasped intuitively, allowing easy judgment of levels and threshold values.
Many Measurement and Discrimination
Functions Using External Event Input
Offers a wide variety of
application possibilities, such detection and judgment while synchronizing on
an external signal.
Sampling at 50 Times per Second
Provides an input sampling cycle at least three times faster than earlier
models (12.5 times faster for temperature input models) at 50 times/second
(see note). In addition to improved response times for judgement output and
transfer output, average processing can be used to increase the stability of
Note: The K3HB-S
Linear Sensor Indicator features high-speed response of 2,000 times/second.
Short Body with
Depth of Only 95 mm (from Behind the Front Panel)
A short body of only 95 mm
contributes to the development of slimmer and smaller control panels and
(The depth is 100 mm
when mounted to the terminal cover.)
Depth of DeviceNet models is 97 mm.
Select a Comparative Output Pattern
to Suit the Discrimination or Control Application
The output pattern for comparative
outputs can be selected. In addition to high/low comparison with set values,
output based on level changes is also possible. (Use the type of output
pattern appropriate for the application.)
The HH, H, L, or LL outputs must be set in that order for the zone outputs to
output correctly. (This is because the comparative set values and outputs for
standard and level outputs are in a 1-to-1 relationship, whereas the meaning
of zone outputs depends on the settings of all the comparative set values.)
Lineup Includes DeviceNet Models Enabling High-speed Data Communications
with PLCs without Special Programming
DeviceNet compliance enables high-speed data transmission by allocating
setting and monitoring parameters in the I/O memory of the PLC. This
capability greatly reduces labor spent in developing communications programs.