Industry Top-class Tracking Performance
Speed Response Frequency of 2 kHz
Speed response is representative of servo system characteristics. In the
OMNUC G5, the industry’s fastest response has been achieved at 2 kHz. By
improving the speed response by twice compared to previous OMRON models,
the stabilization time has been shortened and this contributes to tact
Data Updating Cycle of 250µm (EtherCAT models)
EtherCAT communication model is newly added
to the OMNUC G5 Series Servo Drives. The data updating cycle is shortened
to 250µs, which is 4 times faster than previous OMRON models.
Motion control accurately follows commands.
Effective for simultaneous control as well as improving tact time.
* Combination of R88D-KT02H Servo Drive and
R88M-K20030H Servomotor. Example of actual measurements taken with gain
adjusted by CX-Drive with inertia ratio of x1.
Reduced Tact Time with Higher Speed
Maximum rotation speed for Servo Motors : 6,000 r/min*
The maximum rotation speed of R88M-series
Servomotors has increased to 6,000 r/min, resulting in high-speed
positioning that can reduce tact time.
* Applicable to 100 V/200 V models with 750
W or less.
Best Positioning Accuracy
Featuring a 20-bit high-resolution
High-precision positioning can be achieved
with the built-in encoder, 8 times the resolution of previous OMRON models
at 20 bits.
Fully Closed Loop Control Is a Standard
High-precision and high-response positioning
can be realized without being affected by temperature changes by
determining the position using direct feedback of the control position
from the external scale, to enable using fully closed loop control without
options. (The external scale connector terminal is a standard feature.)
High-speed and High-precision Positioning
Pulse input response frequency: 4 Mpps
The Servo Drive response to command pulses
is 4 Mpps, twice that of previous OMRON models. Response delays are thus
reduced enabling high-speed and high-precision positioning.
Ideal for Applications That Require High Accuracy
Improved vibration control function
With the vibration control function, if the
tip of the device is vibrating, the vibration frequency can be set to
remove the vibration. It can also be used to suppress vibration resulting
from starting and stopping the device, allowing precise movement.