Product Index :: Safety Solutions :: Safety Door Switches

D40Z Compact Non-Contact Door Switch

 

* Ordering information * Specifications * Configurations * Dimensions, and etc     can be found in our PDF brochure.

Wide Range of Applications at the Highest Safety Level. Supports ISO 13849-1 (Safety Category 4/PLe). Can Be Used on Higher Risk Level Applications by Connecting to Safety Controllers.

• Supports a wide range of applications in combination with Safety Controller G9SP or G9SX-NS[].

• Up to 30 units can be connected.
  Ideal for middle to large scale device applications.

• Contributes to shortening the time it takes to find the cause of failure by the switch's LED display patterns.

• Photocoupler monitor output allows connection to a general-purpose PLC (NPN type).

• Compatibility with the D40A allows standardization of machine design.

• Compact Non-contact Door Switch can be mounted from both sides.

   

  » Inquire about D40Z Non-contact Door Switch

Features

High Level of Safety for a Wide Range of Applications

ISO 13849-1 (Safety Category 4/PLe) Achieved with the Non-contact Door Switch
 

Self-diagnosis Function

OMRON's unique electromagnetic induction system for safety was achieved by implementing a detection function for external wiring errors in the Switch.

Redundant Internal Circuit

The thorough pursuit of safety through mutual checking by double CPUs.

Series Connection

Up 30 Switches can be connected to one Controller while maintaining safety category 4/PLe

The D40Z can be connected to G9SP or G9SX-NS Safety Controllers. Select the best model for your application.

Note:

1. The G9SP supports 2 channels of 15 units each. For more information, refer to Applicable level and the number of connections according to controller combination in catalog (page 5).
2 : Refer to catalog (page 16) for details on safety categories (EN 954-1 and ISO 13849-1).

Safety software monitoring and diagnosis to detect failures
(not possible with series connections of mechanical switches)

How safety category 4/PLe was achieved with series connections

Electromagnetic Induction Method

Stable Detection

With these electronic switches, stable detection is possible even when the door closes slowly.

No Adhesion of Iron Particles

Permanent magnets are not used, so iron is not attracted, making maintenance easier.

Visible Safety

Checking at the Production Site

The switch's LED indication patterns make identification of abnormal condition possible at the production sites.


 

Centralized Monitoring

Bipolar NPN/PNP allows for easy connection with any PLC.
The error location can be easily identified. Using a branch relay for a different pole is not required.

Compact Body and Non-contact Feature Allows Easier Mounting

Compact Actuator

The D40Z requires less space even inside the door.

Mountable on Both Sides

The D40Z can be mounted to any door as the above feature allows the user to select the direction to run the cable.

Top

See Related Products:

	Programmable Safety Controller     G9SP Configurable Safety Controller with flexible range suits any system.
	Compact Non-Contact Door Switch / Flexible Safety Unit     D40A/ G9SX-NS Electronic detection mechanism for better stability in non-contact door switch operation.