FAQ No. FAQ00702
Question
It seems that
61F Floatless Level Controller's electrodes are dirty and sensitivity has dropped. How can I clean
them?
Answer
Tarnish on the electrodes will cause poor conductivity.
Polish the electrodes with an abrasive such as fine sandpaper.
Use a cloth to wipe off the residue.
The electrodes are stainless steel, so it is also acceptable to use a
commercial chemical cleanser, but be sure that the liquid in the container
is not affected. If the electrodes are extremely dirty, it may be
necessary to replace them.
Other Level Controller
FAQs
 Can the K7L be used as a substitute for the 61F-GPN-V50 Water Leak Detector?
What is the two-wire operating principle of the 61F-[]R Controllers?
How does the 61F Controller operate when power is restored after a power interruption?
| 
Clearance Centre
